Home > HARDWARE > CONSTRUCTION HARDWARE > LUMBER / MOLDING/TRIM
Choose a sub category:
TREATED WOOD TRIM DECKING TRIM-METAL WOOD MOLDINGS
WOOD MOLDING TRIM PIECES PVC MOLDINGS MISC. SIDING
MOUNTING BLOCKS CORNER PROTECTORS WALLBOARD MOLDING
CABINET MOLDING / TRIM EDGE BANDING HIDE-AWAY IRONING BOARDS
WOOD LAMINATE DIMENSIONAL LUMBER PLYWOOD
PLASTIC PANELS & ACCESSORIES BACKSPLASH PANELS & TRIM CRAFT WOOD
TREATED LUMBER
Sort By:
1 2 3 ... 8
Band-It 25233 Replacement Single Bevel Edge Trimmer Blade Marine Ornamental Tiffany Fancy Post Cap Waddell OBTB32 Out Base Corner Block
CLOVERDALE Replacement Single Bevel Edge Trimmer Blade, Dimensions: 1/64 x 3/4 x 1-3/4 in, Suitable for: 33437 Edge Trimmer Appearance-grade, southern yellow pine. MCA treatment, above ground contact. No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
Walltuf 92586 Inside Corner Molding Waddell IBTB52 Inside Base Corner Waddell IBTB32 Inside Base Corner
WallTuf Inside Corner Moulding, Lightweight, Vinyl, White, 8 ft L No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
Wall-Tuff 92588 Cap Molding Waddell OBTB52 Out Base Corner Block Walltuf 92587 Outside Corner Molding
Trims out panels and helps achieve a water resistant finished wall. For use with "Palclad" liner panels. No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. Palclad Pro wall and ceiling liner panels are ideally suited for both industrial and residential interior applications. These waterproof panels are lightweight, have an attractive surface texture, absorb scratches and clean up very easily. Palclad Pro is a cost-effective alternative to traditional FRP panels. Manufactured from 100% recycled content.
Walltuf 92589 Divider Molding Palram 94361 Horizontal Closure Strip Palram 92770 Horizontal Closure Strip
Trims out panels and helps achieve a water resistant finished wall. For use with "Palclad" liner panels. Used under Sun-n-Rain panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation. Used under Suntuf? panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.
Palram 92771 Horizontal Closure Strip American Wood PCOM-144 Common Board American Wood PLCR1X3-4 4-Sided Sanded Common Board
Used under Palruf? or Suntop panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation. ALEXANDRIA Moulding Common Board, 1 in Nominal Thickness, 4 in Width, 4 ft Length Sanded on four sides.
Woodtite 92523 Self Drilling Screw 2 in Waddell RTB35M Rosette Trim Block Waddell RTB35 Beveled Edge Rosette Trim Block
Woodtite 1 in screw (sku 940.4302) with EPDM washer is used to fasten PVC, Sun-n-Rain and Palruf or Polycarbonate, Suntop and Suntuf, corrugated panels in a siding or cladding application and Woodtite 2 in screw (sku 171.0235) also with EPDM washer is used to crown fasten PVC, Sun-n-Rain and Palruf or Polycarbonate, Suntop and Suntuf, corrugated panels in a roofing application. No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
Waddell RTB25 Beveled Edge Rosette Trim Block Deckorators 74834 Railing Connector American Wood PLCR1X4-4 4-Sided Sanded Common Board
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. Pre-drilled to ensure accurate attachment of the railing to the post. Connectors can be used on both railing and composite materials. Includes stainless steel screws. Use for attaching actual 1-1/2 x 3-1/2 in rails. Sanded on four sides.
Waddell BTB25 Base Block Deckorators 74815 Round Baluster Connector SE10764 SILVER 18INL X .27INW
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. Comes with stainless steel screws and will install ten classic balusters. Allows classic balusters to be secured to the rail without drilling. Can be used on both wood and composite railings. ACQ and CA compliant. Do-it-yourself peel and stick tiles are lightweight, easy to handle, cut and maintain. Sticks without adding extra glue, does not yellow or crack with time. Can be installed in minutes over a clean and smooth surface without any mess or specialized tools. Designed for kitchen and bathroom environments, the tiles are resistant to the heat of stovetops and the humidity of bathrooms. Tiles can be cut to size with a razor blade and a straight edge or a sharp pair of scissors.
Palram 92520 Horizontal Closure Strip Deckorators 74818 Stair Connector Deckorators 74817 Stair Connector
Used under Suntuf? panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation. Designed to work with stair angles between 30 to 35 deg and works with both wood and composite materials. Comes with stainless steel screws and will install ten classic balusters. ACQ and CA compliant. Designed to work with stair angles between 30 to 35 deg and works with both wood and composite materials. Comes with stainless steel screws and will install ten classic balusters. ACQ and CA compliant.
Midwest Products 4044  Basswood Strips Marine Ornamental Tiffany Acorn Post Top Marine Ornamental Tiffany Deluxe Octagon Post Top
MIDWEST PRODUCTS Wood Strip, 1/8 in Nominal Thickness, 1/8 in Width, 24 in Length Appearance-grade, white pine. MCA treatment, above ground contact. Appearance-grade, white pine. MCA treatment, above ground contact.
   
 
1 2 3 ... 8