|
|
|
|
|
|
|
|
|
|
|
|
|
|
Keyless Plastic ceiling lamp holders are molded of high-temperature, thermoset plastic to reduce breakage. Mounts on 4 in (101.6 mm) outlet boxes with breakout for 3-1/4 in (82.5 5 mm) box mounting. Leads are 6 in (152.4 mm) 105 deg C insulated stranded #16, stripped 3/4 in (19.05 mm). Pull chain devices include ball chain, 3 ft (0.91 m) of cord, connector and endbell. Top wire versions have terminal screws backed out - ready for wiring - without removing interior. Push wire terminals are top wired with two push-in terminals and two screw terminals for continuous wiring. Sockets available in two piece version to permit interior replacement, dust ring protects against plaster and dirt. Shade grooves provided on two piece units.
|
Porcelain. Mounts on 4" outlet boxes with breakout for 3-1/4" box mounting. One piece with feed through. Terminal screws backed out for wiring without removing the interior. UL 496 Listed, NOM Certified, meets CSA requirements. 250 volt, 660 watts.
|
Made of UV and heat resistant thermoset material (Urea). Nickel-plated brass screw shell. 250 V/660 W maximum. Includes corrosion resistant steel hardware. cULus listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Meets all UL 496 requirements. Molded of high-temperature, thermoset plastic to prevent discoloration and reduce breakage. Mounts on 4" outlet boxes with breakout for 3-1/4" box mounting. Pull chain, includes ball chain, 3' of cord, connector and end bell. Terminal screws backed out, ready for wiring without removing interior. Push wire terminals are top wired with two push-in terminals and two screw terminals for continuous wiring. Two piece version with 15 amp 125 volt, 250 watts AC 2P3W outlet, plastic.
|
Porcelain, mounts on 4" outlet box with breakout for 3-1/4" box mounting. Interior is removable. Includes ball chain, 3' of cord, connector and end ball. UL Listed, meets CSA requirements, NOM certified. 250 volt, 660 watts.
|
With 15 A 125 VAC outlet. High-strength insulator porcelain. Mounts on 4 in outlet boxes with breakout for 3-1/4 in box mounting. Pull chain socket interior is removable. Includes ball chain, 3 ft of cord, connector and end bell. Terminal screws are backed out ready for wiring without removing the interior. Dust ring protects against plaster and dirt. UL 496 listed, NOM certified, meets CSA requirements. 15 A, 125 V, 660 W.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The overall height is 9/16 in and the track has a decorative reveal at the ceiling line. It accepts both lazer track lamp holders and Halo power-trac lamp holders. Connectors push into the ends of the track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.
|
With 15 A 125 VAC outlet. High-strength insulator porcelain. Mounts on 4 in outlet boxes with breakout for 3-1/4 in box mounting. Pull chain socket interior is removable. Includes ball chain, 3 ft cord, connector and end bell. Terminal screws are backed out ready for wiring without removing the interior. Dust ring protects against plaster and dirt. UL 496 Listed, NOM Certified, meets CSA requirements. 15 A, 125 V, 660 W.
|
Molded of heat and impact resistant plastic to prevent discoloring and reduce breakage. Mount on 4" outlet and have breakouts for 3-1/4" boxes. Mounting screws included. Terminal screws, staked and backed out for wiring without removing interior. Socket permit interior replacement. Dust ring protects against plaster and dirt. Include short length of ball chain, connector, 3' of cord and end bell. With shade groove. 250 volt, 250 watts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Molded of high-temperature, thermoset plastic. Mounts on 4 in (101.6 mm) outlet box with knockouts for 3-1/4 in (82.5 mm) box mounting. Comes with 6 in pigtail leads that are 221 deg F (105 deg C) insulated standard number 18 AWG wire, stripped 3/4 in (19 mm). 660 W, 250 VAC. ROHS compliant. File E7182, cULus, Evaluated to UL496.
|
For use with indoor gaslights. Replaces broken burner head or can be used with soft mantle F220353 and gasket 20339 to convert light from pre-formed mantle to soft mantle.
|
Lantern with clear jelly jar design glass shade. 4-1/2" diameter x 8-1/8" height x 5-3/4" base extension. Uses one medium base bulb, 60 watt maximum, (not included). cULus Listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Uses one medium base bulb, 60 watt maximum, (not included). 7-1/2" height x 4-1/2" width x 5-3/8" extension. cULus Listed.
|
Lantern with clear jelly jar design glass shade. 4-1/2" diameter x 8-1/8" height x 5-3/4" base extension. Uses one medium base bulb, 60 watt maximum, (not included). cULus Listed.
|
This is a Boston Harbor mount for Post Lantern. It has a textured black finish with fluted accents on cast aluminum making it a handsome and durable compliment to any exterior lantern post.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Durable, weather resistant construction. For landscape and holiday lighting. Green with a 6' SJTW 18 gauge green cord and ground stake. cULus Listed.
|
Clear glass jelly jar shade. Uses one clear medium base bulb, 60 watt A19 or 13 watt CFL maximum, (not included). 6" height x 4-3/4" width. cULus Listed.
|
High impact, weather resistant. Green plastic. 18/2 SJTW 8' green cord. Wall mount and ground stake included. 120 volt, uses 150 watt maximum, par 38 bulb, not included. Polybagged. UL Listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of UV and heat resistant thermoset material (Urea). Nickel-plated brass screw shell. 250 V/660 W maximum. Includes corrosion resistant steel hardware. cULus listed.
|
Open recessed trim ring, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (284.2474), H7RT (942.0381) and SHALLOW H27T (989.1672). Sleeved.
|
Clear glass jelly jar shade. Uses one clear medium base bulb, 60 watt A19 or 13 watt CFL maximum, (not included). 6" height x 4-3/4" width. cULus Listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with 120 volt Incandescent lamps. Aluminum construction for greater heat dissipation. For installations where housing will be in direct contact with ceiling insulation. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket assures proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts. Slide-N-Slide connectors allow non-metallic sheathed cable to be installed without removing knockouts. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span. Can be field shortened for 12" joist. Installation: 7-1/2" height allows use in 2 x 8 joist construction. Housing accommodates ceilings up to 2" thick. Requires 6-1/2" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated.
|
The overall height is 9/16 in and the track has a decorative reveal at the ceiling line. It accepts both lazer track lamp holders and Halo power-trac lamp holders. Connectors push into the ends of the track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.
|
Trim ring with phenolic baffle, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815), H71CT (552.4277), H71CAT (854.3951), H7RT (942.0381), H7RIC (025.9697) and SHALLOW H27T (989.1672). Sleeved.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The overall height is 9/16 in and the track has a decorative reveal at the ceiling line. It accepts both lazer track lamp holders and Halo power-trac lamp holders. Connectors push into the ends of the track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.
|
The overall height is 9/16 in and the track has a decorative reveal at the ceiling line. It accepts both lazer track lamp holders and Halo power-trac lamp holders. Connectors push into the ends of the track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.
|
Open recessed trim ring, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815), and SHALLOW H27T (989.1672). H7RT (942.0381). Sleeved.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diameter of 6-1/2", white trim for use with 5" incandescent rounds. Non-insulated or insulated housings. 75 watt maximum. Bulb sold separately. For use with 5" housings: Halo model numbers (Orgill SKU numbers), H5T (424.1535), H5ICAT (651.3956) and H5RT (635.6182).
|
Air-tite fixture sealed and gasketed to prevent airflow between attic and living areas. For installations where housing will be in direct contact with ceiling insulation. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket assures proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts. Slide-N-Slide connectors allow non-metallic sheathed cable to be installed without removing knockouts. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span. Can be field shortened for 12" joist. Installation: 7-1/2" height allows use in 2 x 8 joist construction. Housing accommodates ceilings up to 1" thick. Requires 6-1/2" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated.
|
Open recessed trim ring, 7-1/4" OD, 3-7/8" ID, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7ICT (552 4277), H71CAT (854 3951), H7RIC (025 9697). Sleeved.
|
|
|
