|
|
|
|
|
|
|
|
|
|
|
|
|
|
Works with most drills. Easy to install, thermoplastic construction, corrosion resistant steel shaft. Connects to garden hose, 3/4" suction and discharge, maximum drill* speed 1200 rpm, recommended drill chuck size: 3/8" or larger. Drill and garden hose sold separately.
|
Works with any drill (1200 RPM or higher). Perfect for emptying overflowing dishwashers, washing machines, aquariums and clogged sinks. Pumps up to 225 GPH. Self-priming.
|
For use with pedestal and submersible sump pumps. 24' x 1-1/4" flexible drain tubing, 1-1/4" and 1-1/2" high-impact NPT barbed adapters, hose clamp included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Work with all pumps with a discharge size of 1-1/4" or 1-1/2". For permanent or temporary use. 24' poly drainage tubing. Includes 1-1/4" and 1-1/2" adapters with rust resistant hose clamps.
|
Sump pump discharge hose kit. 24' length.
|
Heavy-duty flexible hose for suction or discharge. For permanent or temporary use. Includes 1-1/2" corrugated hose, 1-1/2" male adapter and stainless steel hose clamp. 24' length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High density polyethylene constructed. Meets ASTM D3350. CSA approved.
|
Attaches to electric drill. Standard hose threads.
|
Sump pump discharge hose kit. 24' length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For Models: SSF33, SSF50, CDU790 and CDU800.
|
Non-mercury tethered float switch, 10' cord with piggyback plug, flexible wire construction. Run current:13 amps. Start current: 90 amps. Liquid temperature: 140 degrees F.
|
High density polyethylene construction. Includes three pre-formed inlet collars sized to fit 4" corrugated polyethylene drainage lines. Molded side panel is designed lines. Molded side panel is designed to accept outside basement perimeter line at any elevation along well wall. Meets ASTM D3350. 18" Dia. x 24" Length. CSA approved. Lid not included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Includes one water pump model WP10, with 12 foot, 1-1/4" discharge hose. Powered by water, uses no electricity. There are no moving parts and no motors to burn out. Power is regulated by hose bib which pumps to within 1/8" of surface. Non-corrosive and uses 1-1/4" or 1-1/2" discharge hose. Pumps approximately 800 gallons of water per hour. Safe and easy to use. Boxed.
|
10' power cord, flexible wire construction, pump bracket sold separately. Run current: 13 amps. Start current 90 amps. Liquid temperature 140 degrees F.
|
Pumps up to 1 gallon per 4 full strokes. Includes 6' drain hose. Works great for draining water from boats, toilets, sinks, rain barrels, pools, fountains, ponds, lakes & general water transfer. Two size options: 36" water pump or 18" water pump. Includes garden, suction and drain hose adapters. Easy to assemble and requires no electricity to operate. Garden hose adapter included. Made from high quality thermoplastic. Disassembles quickly for easy storage.High quality aluminum push rod with ergonomic handle.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replaces most standard float switches. Ideal for 14" diameter or larger sump basins. Piggy-back style plug with 10' cord. Mounting strap included.
|
Manual, submersible pump. Ideal for dewatering applications. Reinforced thermoplastic construction will not rust or corrode. Screened bottom intake design removes water to within 3/16" of surface. 1300 GPH.
|
2" Heavy-duty discharge hose. Includes 2" male and female coupling. For engine drive pumps.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Submersible utility pump - ideal for removing unwanted water to 3/16" depth. Thermoplastic construction for the highest corrosion-resistance. Includes 8' power cord, and garden hose adapter. 1200 gph. CSA certified.
|
Durable thermoplastic body resists corrosion. Efficient motor with 115V thermal overload protection. Vertical float switch designed for minimum 12" diameter sump basin. Pumps up to 3480 GPH. CSA certified.
|
1/5 HP reinforced thermoplastic submersible utility pump. Assembled in the US with foreign and domestic parts. Pumps dirty water with small (1/2 in.) solids. Removes water down to 3/8 in. of surface. Corrosion resistant, sealed thermoplastic construction. Fully submersible. Max flow rate is 1800 GPH at 0 ft. 1 1/4 in. discharge with 3/4 in. garden hose adapter.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1/4 HP split capacitor motor - high efficiency - Low amp draw, 10' grounded waterproof power cord, pumps up to 30 gallons per minute, 1800 gallons per hour, side and bottom intake provides for clog resistant suction, cooler operating 115V motor provides continuous duty, pump will lift water over 25 ft. vertical height, 1-1/4" male iron pipe discharge thread, standard hose adapter included. One year warranty from Superior Pump Co.
|
Durable thermoplastic body resists corrosion. Efficient motor with 115V thermal overload protection. Vertical float switch designed for minimum 12" diameter sump basin. Pumps up to 3480 GPH. CSA certified.
|
Rugged thermoplastic body resists corrosion and impact. Portable and versatile for a variety of applications. Pumps up to 1320 GPH. Self-cleaning screen reduces maintenance. Cord wrap feature for organized storage and portability. Easy to use - includes 8' power cord and garden hose adapter. CSA certified.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2" Reinforced suction hose. Includes strainer, 2" male and female couplings. For engine drive pumps. 15', non collapsible.
|
Submersible utility pump for removing unwanted water down to 3/16" depth. Thermoplastic construction for the highest corrosion-resistance. High-output performance, pumps up to 1470 GPH. Removable inlet screen for easy cleaning. Includes 8' power cord and garden hose adapter. CSA certified.
|
1/3HP split capacitor motor - high efficiency - low Amp draw, 10' grounded waterproof cord, pumps up to 40 gallons per minute, 2400 gallons per hour, side and bottom intake provides for clog resistant suction, tethered float switch with piggy back plug included, cooler operating 115V motor provides continuous duty, pump will lift water over 25 ft. vertical height, 1-1/4" male iron pipe discharge thread, 1-1/4" female pipe adapter and 1-1/2" male iron pipe adapter included. One year warranty from Superior Pump Co.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use in sump basins 12" or larger. Thermoplastic base, fully adjustable automatic switch, steel drive shaft, metal switch arm, 1-1/4" discharge. 2.76 amps, 10' cord. Pumps up to 50gpm/3000gph. One year warranty from Superior Pump.
|
Continuous duty, thermally protected - split capacitor motor. Pumps will lift water up to 25' of vertical height. Tough thermoplastic construction, Large 1-1/4" top discharge for high capacity pumping. Garden hose adapter included. Can be used as a sump pump by adding an optional float switch. 4.1 amps, handles 1/8" solids. Pumps up to 40gpm/2400gph. 1 year wrranty from Superior Pump.
|
1/6 HP reinforced thermoplastic submersible utility pump. High flow rate, oil-free pump removes water down to 3/8 in. of surface. Corrosion resistant, sealed thermoplastic construction. Fully submersible. Max flow rate is 3000 GPH at 0 ft. 1 1/4 in. discharge with 3/4 in. garden hose adapter.
|
|
|
