|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ProSource copper fitting brushes are ideal for cleaning the inside of tubing and fittings. They are polybagged. The trim length is 1/2 in L.
|
This key will fit valves and it's for use on outside water faucets. It's made of constructed metal which provides strength and durability. The silcock key is for a 1/4 in stem.
|
E-Z clean abrasive sandcloth is a flexible yet strong cotton fabric combined with a tough, hard 120-grit aluminum oxide abrasive to provide faster cleaning. Two layers of a special adhesive and water-resistant resin make a plumber's roll that provides consistently stronger solder joints.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ProSource copper fitting brushes are ideal for cleaning the inside of tubing and fittings. They are polybagged. The trim length is 3/4 in L.
|
Designed for cleaning, deburring and polishing the inside of copper fittings prior to soldering. Can also be used to clean plastic and brass. Brush is made of high carbon steel bristles to ensure a long lasting, durable and sharp cutting surface. Contoured plastic handle provides a comfortable grip. Stem is made of galvanized steel wire.
|
OD tube cleaning brush is used for cleaning the outside diameter of copper piping prior to soldering. Can also be used to clean plastic pipe. Cleans outside piping quickly and effectively. Outer cover is made of high-impact polystyrene. Brush is made of hard bright tempered steel wire. Easy-to-grip brush ensures a clean surface and prepares the pipe for soldering or solvent welding.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for cleaning, deburring and polishing the inside of copper fittings prior to soldering. Can also be used to clean plastic and brass. Brush is made of high carbon steel bristles to ensure a long lasting, durable and sharp cutting surface. Contoured plastic handle provides a comfortable grip. Stem is made of galvanized steel wire.
|
Designed for cleaning, deburring and polishing the inside of copper fittings prior to soldering. Can also be used to clean plastic and brass. Brush is made of high carbon steel bristles to ensure a long lasting, durable and sharp cutting surface. Contoured plastic handle provides a comfortable grip. Stem is made of galvanized steel wire.
|
OD tube cleaning brush is used for cleaning the outside diameter of copper piping prior to soldering. Can also be used to clean plastic pipe. Cleans outside piping quickly and effectively. Outer cover is made of high-impact polystyrene. Brush is made of hard bright tempered steel wire. Easy-to-grip brush ensures a clean surface and prepares the pipe for soldering or solvent welding.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OD tube cleaning brush is used for cleaning the outside diameter of copper piping prior to soldering. Can also be used to clean plastic pipe. Cleans outside piping quickly and effectively. Outer cover is made of high-impact polystyrene. Brush is made of hard bright tempered steel wire. Easy-to-grip brush ensures a clean surface and prepares the pipe for soldering or solvent welding.
|
Oatey? Plumber's abrasive sandcloth blends a lightweight but strong cotton-based fabric with a tough aluminum abrasive for cleaning copper pipe, fittings and other soft metals.
|
Will not tear or rust. For cleaning pipe and fittings and general use. Contains two 2 x 6 in coarse-grade nylon pads.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Soft bristles for applying primer, glue, or other solutions. 2 per card.
|
For smoothing pipes to create secure connections.
|
Key for loose key stops. Tamperproof.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ProSource tube cutter wheel is the replacement cutter for Sku #682-1771 and #680-1716.
|
For use with all GENERAL cutters for cutting copper tubing.
|
GENERAL Tools #858 PVC pipe cable saw is ideal for cutting PVC pipe in a confined area. The cable saw is great for pipes that are against walls, between rafters or anywhere else where a normal cutter will not fit. This durable saw is a stainless steel 24 in serrated cutting cable that easily slices through pipe up to 8 in Dia. It can cut pipes of a wide variety of sizes and doesn't require any special adjustment to do so. The PVC cutters are used for cutting PVC, PE and ABS pipe. The hose and tubing cutter also cuts flexible rubber, PVC, ABS and polyethylene tubing. Its ergonomically designed handle allows for comfort and control.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The cable saw is made of premium quality stainless steel. It's ideal for tight spots, for cutting PVC pipe, and cutting plastic pipe in tight areas.
|
1 per card.
|
"No. 42835: For use with all Superior 1-1/8"" capacity tube cutters."
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For tube and pipe cutters. Made of alloy steel, heat treated and black oxided. No. 42525: For use with both Superior mini tube cutters (#35025 & #35078).
|
1 per card.
|
3M? cloth sanding abrasive roll comes with a cloth backing that's flexible enough to sand hard-to-reach areas. Rolls provide a convenient profile for hand or jitterbug sanding in tight locations. Use these abrasive rolls for hand strapping, blending scuff marks and cleaning parts with curved profiles such as pipes and tubes. Our abrasive roll has a durable cloth-backing that combines with long-lasting abrasive to provide an extended service life.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Loose key handle. Fits all models.
|
The ProSource shower valve socket wrench set has a nickel-plated steel body. It fits 29/32 in and 31/32 in packing nuts.
|
The faucet reseating tool can be used to resurface compression-type faucet seats. Tool features hardened steel cutters and centering cone to help ensure level resurfacing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits most sizes of square and hex notes in faucet seats. 6 in x 6 in heat-treated steel.
|
This ProSource mini tubing cutters cutting capacity is 1/8 to 7/8 in OD. The body is made zinc with a steel knob and the color is silver.
|
Twisted wire handle. Can be used with power drill.
|
|
|
