|
|
|
|
|
|
|
|
|
|
|
|
|
|
Protects battery posts and battery cable terminals from corrosion. Top post batteries, top post battery cables, side terminal batteries, and side terminal battery cables (6 and 12 volt only).
|
All metal construction. Spring-loaded teeth hold fast and secure. Plating resists rust and corrosion. Interlocking necks prevent jaw offset. Wire can be attached with crimping ears or threaded screw.
|
Temperature compensating. Floating balls indicate cell charge condition.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Constructed from a magnesium/aluminum alloy. Replacement for a worn or corroded terminal. Works with battery cables gauge 6 through gauge 1. 6 and 12 volt only. RoHS Compliant. Carded.
|
Works with battery cables 6 through 1 gauge. Side terminal batteries and side terminal battery cables (6 and 12 volt only).
|
Replace a worn or corroded terminal. Works with battery cables 6 through 1 gauge. Marine grade batteries and marine battery cables (6 and 12 volt only).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All metal construction. Spring-loaded teeth hold fast and secure. Plating resists rust and corrosion. Interlocking necks prevent jaw offset. Wire can be attached with crimping ears or threaded screw.
|
Two-in-one tool removes film deposits and corrosion build-up. Cap pulls off to reveal brush used for cleaning terminals. Opening on bottom of tool designed to fit securely around any size battery post. Carded.
|
Secures battery using hooks. Includes tempered steel bolts, washers, and nuts. Used in combination with battery tray and battery frame/hold down (not included). Carded.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Color-coded grip sleeves. Clamps work on all top and side post batteries. Designed for 12, 10 and 8 gauge booster cables.
|
All metal construction with color-coded flexible vinyl insulators and matched crimping ears that grip wire securely. Jaws clamp solidly on terminal.
|
Converts side terminal battery to a post battery. Posts marked "+" and "-" for easy identification. For easier charging and testing of side terminal batteries.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Removes terminal leads from battery with ease. Prevents damage to post or battery case. Can also be used to pull small gears, pulleys and bearings. 6 and 12 volt batteries.
|
Clean battery terminals before they corrode or wear out, helps extend the life of battery terminals and battery cable connectivity. Dual purpose brush. Metal construction.
|
For battery and testing equipment applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For battery and testing equipment applications.
|
For battery and testing equipment applications.
|
Professional quality, 8" long, heavy-gauge, acid-resistant glass filler tube with HD float indicator measures specific gravity of electrolytes in car battery to determine charge condition. Helps maintain proper battery pH levels to keep in good working condition. For use with 6 and 12 volt batteries. Easy-to-read calibrations show status of battery.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replaces old and rusted terminals. Heavy duty lead construction.
|
For battery and testing equipment applications.
|
Safely adds battery acid to battery. 6 ounce capacity bulb with flexible spout. Bulb is acid resistant and engineered to retain shape. For use with 6 and 12 volt batteries.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For battery and testing equipment applications.
|
Cleans and protects, cleans battery terminals, connectors, battery tray and holder bolts and brackets, ensures maximum current flow from the battery to the starter, provides a protective barrier to inhibit corrosion of battery terminals and cable connectors. Aerosol can.
|
Terminal end constructed from tin-plated brass. PVC wire jacket material is oil, chemical, and water resistant. Full gauge stranded copper extends entire length of flattened lug insuring complete conductivity. Single lead wire to power additional application. SAE Standards, RoHS Compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Converts top post terminal battery to a side terminal battery. Marked "+" and "-" for easy identification. Works with battery cables 6 through 1 gauge. 6 and 12 volt only. Package contains one positive and one negative adapter.
|
Provides a protective barrier to inhibit corrosion of battery terminals, cable connectors, tray, holder bolts, and brackets. Based on reliable lithium grease technology. Prevents battery acid corrosion on terminals and battery hardware. Will not burn off like petroleum-based products. Will not sag or run under hot hood. Ensures max starting and charging currents. Aerosol can.
|
Terminal end constructed from tin-plated brass. PVC wire jacket material is oil, chemical, and water resistant. Full gauge stranded copper extends entire length of flattened lug insuring complete conductivity. Single lead wire to power additional application. SAE Standards, RoHS Compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Reshapes and cleans terminals and positive and negative posts at the correct angles. Assures perfect contact for surer starts.
|
Lead-free design. Terminal end constructed from tin-plated brass. PVC wire jacket material is oil, chemical, and water resistant. Full gauge stranded copper extends entire length of flattened lug insuring complete conductivity. SAE Standards, RoHS Compliant.
|
Replace a worn or corroded screw/nut on top post terminals. Fits positive or negative posts. Includes hex nuts. Top post battery cables (6 and 12 volt only).
|
|
|
