|
|
|
|
|
|
|
|
|
|
|
|
|
|
Threaded hex hub, die-cast zinc inner race, flat edge, plastic wheel with steel ball bearings.
|
This 3/4 in tub enclosure roller is constructed from nylon. It features an oval edged design with a threaded hex hub. It comes complete with fasteners for a quick and easy installation.
|
Shower door bottom sweep with 3/4 in tee shaped tip, fits into extrusion slot on bottom of swinging shower door to prevent water from leaking onto floor.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Threaded hex hub, die-cast zinc inner race, steel ball bearings, plastic wheel, round edge.
|
Threaded hex hub, die-cast zinc inner race, steel ball bearings, plastic wheel, flat edge.
|
Keep your shower door secure with this Prime-Line stainless steel shower door catch. This is a stainless steel shower door catch with a spring-loaded nylon tip. Designed to be attached to the door frame of swinging shower door and hold the door closed. Nylon latch allows for a soft but durable hold. The housing is designed to be adjustable with the elongated mounting slots which are 1 in on center.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is a gray vinyl swinging shower door sweep with a Star shaped insert at the top that fits into an extrusion slot on the bottom of the door. The 1/8 in star shape inserts into a similar extruded shape in the bottom of the aluminum framed swinging shower door. The sweep projects down 1-3/16 in from the bottom of the door frame.
|
Injection molded plastic bottom guide fits 7/16 in THK door panels. Installed with double-sided tape or snaps into extrusion fin. Used by several shower door manufacturers.
|
This guide is constructed from nylon. It features snap-in tabs that hold your guide to your track. Keeps your sliding tub enclosure doors aligned. Used on enclosures manufactured by International.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 in T-shaped tip fits into extrusion slot on bottom of swinging shower door to prevent water from leaking onto floor.
|
This is a universally used gray flat style shower door sweep that is 36 in L and 1-1/2 in W and can be cut to size. It is held onto the swinging shower door by a drip rail that is located on the bottom of the door. Easy Installation, just remove the screws from the metal strip holding the old sweep and remove. cut the new sweep to size, determine how far down the sweep needs to hang and install by replacing the drip rail over it and re-installing the screws.
|
White plastic bottom guide acts as a panel retainer. Used by Kinkead and Sterling.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This shower door roller assembly is constructed of extruded aluminum and comes in a milled aluminum finish. It features a thru-glass binder post and screw for fastening the bracket to the top of the glass on frameless sliding shower door systems. the wheel is constructed of plastic. It features a flat edge and steel ball bearings for long-lasting, smooth operation. This frameless shower door top roller assembly bracket is used by many shower door manufacturers.
|
These tub enclosure bottom guides are constructed of plastic and come gray in color. They are designed to fit as replacement guides for sliding tub enclosure doors manufactured by Keystone shower doors. Installation is easy with only two fasteners to replace. These guides are adjustable with the slotted mounting holes provided in each. Use of a flat spacer behind existing guide will be required for use with replacement guides.
|
The Prime-Line M 6145 Frameless Glass Door Shower Top Bracket Roller Assembly is used to replace damaged or missing frameless shower door top roller assemblies. The shower door glass roller assembly has a diagonal mounting slot and is adjustable by sliding the roller up or down in the diagonal mounting slot and then tightening when you have it at the desired height. This sliding door rollers replacement has a top hung design. The assembly clamps onto the top of the shower door glass with a vinyl glazing gasket. This is a tub and shower door roller assembly used on frameless glass shower doors. The sliding shower door roller assembly accepts up to 3/16 in thick glass panels. This sliding roller assembly has an oval edged 3/4 in nylon ball bearing roller attached to an aluminum bracket. Please refer to the line art drawing for dimensions and compare with your needs before purchasing.
|
|
|
|
|
|
|
|
|
|
|
|
|
Prime-Line Shower Door Bottom Seal, Half-Round, Vinyl, Black, Dimensions: 36 in L x 5/32 in W x 13/16 in H
|
|
|
