|
|
|
|
|
|
|
|
|
|
|
|
|
|
These clamps are designed with an easy-to-use pressure mechanism for use in various applications. They are designed for use without any tools on non-rigid flexible ducts.
|
Used for secure connection to flexible aluminum duct.
|
The Lambro 4 in galvanized steel worm gear clamp is ideal for attaching semi-rigid and rigid ducts to vents, exhaust outlets, connectors, elbows and other various connections. These clamps easily adjust using a hex or flat head screwdriver to secure the connection point. It is recommended to use a manual screwdriver to avoid over tightening and stripping the screw.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
These clamps are made up of zinc-plated steel and are ideal for the installation of most home and industrial dryers. Their unique design allows for easy-to-tighten convenience. Clamps can also be used on most bath fans and other applications.
|
The Lambro 3 to 4 in plastic duct connector is ideal for bath fan exhaust installations. Used to increase the duct diameter size from the bath fan 3 in exhaust port to the 4 in duct going to the outside. The polypropylene material resists moisture to remain corrosion-free.
|
The Lambro 4 in aluminum adjustable elbow is ideal accessory can be used in many general venting applications. The all aluminum elbow can be adjusted up to 90 to use at various angles. The elbow has 1-crimped end and 1-straight end for easy installations. Check local building codes prior to installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Lambro 4 in aluminum splice connector is ideal for effectively connecting two sections of flexible foil, flexible insulated duct or rigid pipe together. The connector is crimped on both ends with a center bead to securely fasten the sections of duct to. The connector is constructed of 28 gauge aluminum and is suitable for use in most heating, venting and air conditioning applications.
|
The Lambro 4 in ABS white plastic quick fit clothes dryer exhaust elbow is ideal accessory for venting a clothes dryer. This elbow is used for clothes dryer exhaust venting applications when connecting the flexible duct to the clothes dryer. The elbow labeled "A" has a rubber gasket that slides onto the dryer exhaust outlet securely without the need for a clamp. When using UL 2158A semi-rigid duct, simply thread the elbow into one end of the duct (no clamp needed). The kit includes a 4 in worm gear clamp to connect foil flex UL 2158A duct to this elbow. This elbow allows you to inspect and clean your clothes dryer vent duct without the need of tools to disassemble and assemble.
|
Includes face only.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Lambro white plastic in-line draft blocker is ideal for preventing outside air from entering into the home. This accessory can be installed in-line with the duct to the outside vent for clothes dryer exhaust, bath fan exhaust and other general venting applications. When the exhaust airflow is not active, the draft blocker prevents outside air from entering back through the exhaust unit.
|
The Lambro 3 in aluminum adjustable elbow is ideal accessory can be used in many general venting applications. The all aluminum elbow can be adjusted up to 90 to use at various angles. The elbow has 1-crimped end and 1-straight end for easy installations. Check local building codes prior to installation.
|
The Lambro 6 in galvanized steel splice connector is ideal for effectively connecting two sections of flexible foil, flexible insulated duct or rigid pipe together. The connector is crimped on both ends with a center bead to securely fasten the sections of duct to. The connector is constructed of 30 ga galvanized steel and is suitable for use in most heating, venting and air conditioning applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lambro Louvered Vent, Plastic, White, Installation Type: Wall, 4 in L, 4.64 in W, 1.51 in H, Includes: (12) Louvered Vents
|
Flexible aluminum foil LamaFlex duct is ideal for applications where building codes require use of all aluminum duct. The duct has a maximum operating temperature of 250 deg F.
|
The Lambro 4 in white plastic exhaust wall louvered vent with 11 in pipe is ideal for venting through the wall. This vent is used for clothes dryer exhaust, bath fan exhaust and other general venting applications. The built-in flaps prevent back drafts and prevents critters from entering the home through the vent. The plastic vent has a UV additive to prevent premature fading due to the sun.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Aluminum film laminate.
|
semi-rigid aluminum duct is ideal for applications where building codes require use of all aluminum duct. The duct is totally non-combustible with a maximum operating temperature of 400 deg F.
|
Plastic double-sided under eave vent adapts to 4 in or 6 in exhaust ducts. Includes two removable screens and one 6 to 4 in transition collar, has back-draft damper and bug screen.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Lambro 4 in aluminum exhaust wall hood vent with 11 in pipe is ideal for venting through the wall. This vent is used for clothes dryer exhaust, bath fan exhaust and other general venting applications. The exhaust vent allows for maximum exhaust airflow when venting a clothes dryer. The built-in damper prevents back drafts and prevents critters from entering the home through the vent.
|
The Lambro 4 in brown plastic exhaust wall louvered vent with 11 in pipe is ideal for venting through the wall. This vent is used for clothes dryer exhaust, bath fan exhaust and other general venting applications. The built-in flaps prevent back drafts and prevents critters from entering the home through the vent. The plastic vent has a UV additive to prevent premature fading due to the sun.
|
The Lambro flexible semi-rigid 4 in x 8 ft duct is ideal for general-purpose venting applications including bathroom fan and kitchen range hood exhausting. The corrugations throughout the duct prevents collapsing and allows for easily bending the duct when needed. The class 0 aluminum is corrosion-resistant non-combustible and fire-resistant with a maximum operating temperature of 482?F. Check local building codes prior to installation. Do not use for clothes dryer installations (UL 2158A duct must be used).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Linteater Jr. designed for shorter through-the-wall vents, is the most valuable tool you can own to ensure the safe operation of your clothes dryer. Designed for homeowners by a leading manufacturer of professional duct cleaning equipment, the Linteater Jr provides a means for regularly cleaning your dryer vent system. It effectively removes dangerous lint buildup in almost every type of dryer vent, eliminating a leading cause of house fires. The auger brush and two 18 in extension rods screw together for manual or rotary cleaning when powered by your cordless drill (not included). Easy-to-use, the rotating action of the auger brush and flexible rods scours the vent to effectively clean dryer vent systems up to 6 ft L (3 ft from each side). Reduce drying times, save money on utility bills and remove lint build-up. It is easy when cleaning with Gardus power.
|
The Lambro 4 in brown plastic exhaust wall hood vent with 11 in pipe is ideal for venting through the wall. This vent is used for clothes dryer exhaust, bath fan exhaust and other general venting applications. The exhaust vent allows for maximum exhaust airflow when venting a clothes dryer. The built-in damper prevents back drafts while the removable guard prevents critters from entering the home through the vent. The plastic vent has a UV additive to prevent premature fading due to the sun.
|
The Lambro 4 in white plastic exhaust wall hood vent with 11 in pipe is ideal for venting through the wall. This vent is used for clothes dryer exhaust, bath fan exhaust and other general venting applications. The exhaust vent allows for maximum exhaust airflow when venting a clothes dryer. The built-in damper prevents back drafts while the removable guard prevents critters from entering the home through the vent. The plastic vent has a UV additive to prevent premature fading due to the sun.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Builder's excellent Close Elbow is the excellent choice for 90 deg turns, especially on the dryer. It makes 90 deg turns within 4 in and offers excellent crush resistance while maintaining maximum airflow. Rotating collars allow flexible duct to move without disconnecting.
|
Flexible aluminum foil LamaFlex duct is ideal for applications where building codes require use of all aluminum duct. The duct has a maximum operating temperature of 250 deg F.
|
PWM620 is a plastic wide-mouth hood with a free-swinging back-draft flapper. The wide-mouth hood is suitable for dryer venting.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Alternative to outside venting. Concave bottom for maximum efficiency. Includes 4 in x 5 ft Lama flex duct, lint trap, screw-on hanger and two clamps. This unit uses water to catch the lint.
|
The Dryer offset elbow is designed to make 90 deg turns within 4 in It can be used when the outlet pipe on the dryer protrudes up to 2-1/2 in and cannot be trimmed. It can also be used on the wall outlet pipe when it protrudes and cannot be trimmed.
|
UL listed for clothes dryer connection. Aluminum semi-rigid flexible duct. Without clamps. Bulk packed only.
|
|
|
