|
|
|
|
|
|
|
|
|
|
|
|
|
|
This roller is a replacement for some Croft and Keller doors. It is also found in other household situations from the closet to the bathroom. It is a ball bearing 3/4 in high-density polyethylene roller on a threaded hex hub. Often fits onto a bracket that is attached to the door while the roller rides in an upper track above the door opening.
|
Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out. This pull is constructed from durable, weather resistant black plastic. It features a universal, surface mounted, non-handed design that can be used as either a left or right hand pull. The mounting holes are 3 in on center and this handle comes complete with fasteners for your installation. Order yours today and make your sliding screen door secure again.
|
This die-cast keeper or strike is used by many screen door manufacturers. It is 7/32 in W with a 1/4 in deep projection. It has an downward hook and adjustment slots that allows it to be adjusted up or down to the correct position to engage the latch.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1/4 in W center groove nylon wheel, high-tension 2-1/2 in L heat treated steel spring and #8 x 3/8 in Phillips pan head sheet metal screw.
|
Plastic roller with narrow center groove 7/32 in W nylon wheel, concave edge. Includes a 8-32 x 3/8 in machine screw with binder post nut. Fits on air control doors.
|
Consists of 1/4 in W center groove wheel. Heat-treated, high-tension adjustable steel M-spring. Used by several patio door manufacturers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used by metal industries. Center grooved, 1/4 in W, roller. 1-3/4 in L, high-tension, heat treated steel spring. Includes #8 x 3/8 in Phillips sheet metal screw.
|
Bent spring design used by Academy Mfg. And others. Center grooved 5/16 in W wheel, 2-1/4 in L x 5/16 in W flat high-tension heat treated steel spring and #8 x 3/8 in Phillips sheet metal screw.
|
Are you having trouble sliding your screen door open or closed. Have you checked your rollers/roller assemblies. Don't replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This roller assembly with M-shaped tension spring with a 1 in Dia steel ball bearing roller is used by a variety of patio door manufacturers. The heat-treated tension spring is 2-5/16 in L and shaped like an M, giving it the tension needed by the screen door to slide properly. Order yours today and have your door slide like new.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Are you having trouble sliding your screen door open or closed. Have you checked your rollers/roller assemblies. Don't replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This is an Arcadia style roller assembly used by Arcadia doors as well as a variety of other sliding patio door manufacturers. This is also currently a very popular design amongst patio door manufacturers in today's market place. It has a wire tension spring and comes with a 1-1/4 in Dia high-density polyethylene roller and fits onto the Prime-Line part B 569 corner insert (sold separately). It is often used on-the top as well as the bottom of the sliding screen door. Also look at Prime-Line parts B 515, B 610, B 714, B 736 and B 821 for similar spring tension rollers. Order yours today and have your door slide like new.
|
Are you having trouble sliding your screen door open or closed. Have you checked your rollers/roller assemblies. Don't replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This rocker style spring tension roller assembly is used by several patio door manufacturers. The body is stamped steel with a tension spring attached. It has a 1-1/4 in high-density polyethylene roller. It is used on-the top as well as the bottom of the screen door. Order yours today and have your door slide like new.
|
Non-handed; mortise installation, used by several door manufacturers. Includes one plastic in side and outside pull, one steel latch assembly, one plastic activator, one pop rivet and installation screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used by metal industries. Center grooved, 1/4 in W, roller. 1-3/4 in L, high-tension, heat treated steel spring. Includes #8 x 3/8 in Phillips sheet metal screw.
|
Are you having trouble sliding your screen door open or closed. Have you checked your rollers/roller assemblies. Don't replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This high-tension steel spring roller assembly fits onto the Columbia Uni-Fit series door. This roller assembly has a 1 in Dia high-density polyethylene roller mounted in the housing. The flat steel spring end catches onto the inside of the door frame while the flat edges of the two tabs extending out in front of the roller restrict the roller from retracting too far up into the door frame as it rolls. This sliding screen door roller assembly insert has a thinner high-density polyethylene frame than the Prime-Line part B 646. It has an adjustable high-density polyethylene inner housing and high-density polyethylene roller. The assembly inserts into the bottom or top of the sliding screen door using the included screws. The roller adjusts to the correct position needed. This style is found on Columbia sliding screen doors but is also used on a variety of other sliding screen door manufacturers. Please note dimensions and design when comparing with old roller. Order yours today and have your door slide like new.
|
Used by many patio door manufacturers. Steel ball bearing roller in adjustable 2-5/8 in L x 1-3/8 in H x 3/4 in D steel housing with 10-32 machine thread hole on top center and 1/4-20 side threads for mounting.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out. This sliding screen door handle and latch is non-handed and used by Jim Walters as well as a variety of other patio door manufacturers. It contains black plastic inside and outside handles. The handles have mounting holes 3-1/4 in on center. The steel latch is 2-3/8 in long with a 11/16 in projection and slides up and down to engage the keeper (Prime-line part A 148, not included). Order yours today and make your sliding screen door secure again.
|
For sliding glass doors. Center grooved, 5/16 in W steel ball bearing roller and steel inner race with 1/4-20 x 3/4 in carriage bolt and 1/4 in - 20 hex nut.
|
Flush mount fits into door stile. 1/16 in projection inside/outside of patio door. Reversible for right or left hand application. Packed with 4 different latch hooks to fit virtually all applications. For 1 to 1-1/4 in Thk doors. 6-1/2 in distance between attaching screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used by several patio door manufacturers. Consists of 1/4 in W center groove wheel, high-tension heat treated steel V-spring (2 in L before and 2 in L after bend).
|
Used by Air Control, Howmet, Krestmark and many other patio door manufacturers. Steel ball bearing roller and adjustable 2-5/8 in L x 1-3/8 in H x 3/4 in D steel housing assembly with machine threaded holes (10-32 top and 1/4-20 side) for installation.
|
Steel ball bearing roller and adjustable steel housing assembly. Fits on Nu-Air, Bennings, Scotty and many other patio door manufacturers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cylinder Lock, 1-1/4 in, 5-pin tumbler lock with 2 keys, hardened break-away tailpiece. Used to keylock most surface mount handle sets. Keyway is compatible with Weiser?, Kwikset and Weslock.
|
Steel ball bearing roller, adjustable steel housing assembly. Used by many patio door manufacturers. 2-5/8 in L, 1-1/8 in H and 3/4 in W housing dimensions. 10-32 machine thread on top and 1/4-20 machine thread on end of housing.
|
These sliding door rollers are constructed in steel and come in a zinc-plated finish. Each roller features a 105 lb. maximum load capacity rating and concave (grooved) edges for use on raised tracks found in patio sliding doors, sliding screen doors and sliding wardrobe and Closet Doorr systems. These 1-1/2 in OD rollers are constructed with steel center races, 1/4 in ID axle holes and they are only 5/16 in THK. Rollers like these are used in a variety of patio and Closet Doorr roller assemblies. Use these rollers to replace damaged wheels, missing wheels and plastic wheels as needed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Are you having trouble sliding your screen door open or closed. Have you checked your rollers/roller assemblies. Don't replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This Andersen roller assembly is an insert style with mounting tabs and include installation screws. The high-density polyethylene housing has an aluminum inner housing with a 1 in H density polyethylene roller. This roller assembly is used on-the 200 Series Perma-Shield Gliding Doors and 400 Series French wood doors. Height adjustment is down from the side rather than the top or the edge of the door. Order yours today and have your door slide like new.
|
Wright replacement oak patio door handle can be installed on the interior plate of the V1195 or VK1195 flush-mounted latches to provide a larger pulling surface.
|
This Prime-line C 1190 sliding glass door pull handle is constructed of diecast mounting posts and a wooden handle. The mounting posts come finished in black colored paint and the wooden pull handle comes finished in a clear finish. Note - Color of wood may vary per shipment. This pull handle can be installed on doors with mounting hole centers ranging from 6-1/2 in to 6-5/8 in center-to-center. This pull handle is surface-mounted and is used by many patio door manufacturers. This item features a sturdy metal backer support behind the wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Steel housing and hook, round end face plate. Hook position is adjustable, fits on W&F. Hole center of 3-11/16 in.
|
Tandem steel ball bearing roller; adjustable; steel housing assembly. Housing width: 3/4 in. Roller edge type: Concave. Contents: 1 roller assembly.
|
1-1/4 in tandem steel ball bearing rollers; adjustable steel housing; dimensions: thickness 11/16 in; length 3-1/8 in; height 1-1/32 in. Roller edge type: Concave. 2 tandem wheels in roller assembly.
|
|
|
