Home > PAINT & SUNDRIES > PAINT > PRIMERS & SEALERS > MASONRY SEALERS
Sort By:
1 2
PRIMER UNDERLAYMENT LEVEL 1GAL Weiman 5092 Stone Spray-N-Seal Penetrating Sealer Damtite 01071 Waterproofer Powder
A one-part solvent-free, acrylic-based solution used to prime substrates before the application of Sika self leveling underlayment. Protects natural stone surfaces from staining. For stone countertops, floors, walls, vanities and even grout. Also for sealing all types of masonry, stucco, concrete and sanded grout. Has special blend of polymers that bond to the stone and creates a water and oil repellant membrane to prevent staining and allows the stone to breathe and release moisture vapors. Safe for interior and exterior use and is UL Classified for slip resistance. Coverage varies depending on surface. A Portland cement-based, waterproofing coating for sealing, protecting & decorating wall sand surfaces constructed of poured concrete, concrete, cinder block, masonry, stone, brick or stucco. Safe coating for sealing the inside of drinking water concrete tanks and cisterns. Eliminates dampness, resists mold, mildew & flaking, chalking while beautifying and sealing all pores & voids. Unlike ready-mix paints which can only be applied to dry surfaces, this product is made for use on wet or dry surfaces. It also reduces Radon gas infiltration. Wear protective gloves and goggles.
Damtite 04152 Superpatch Concrete Patch Drylok 00542 Masonry Waterproofer Henry PR1760074 Premier Foundation Coating
SuperPatch is a two-component, multi-purpose, waterproofing mortar for patching, repairing or resurfacing concrete, masonry, stucco and brick, up to 1 in thickness in one application. Exact amount of powder and liquid are included in this container. Just mix the powder with liquid together in a clean container. SuperPatch is a non-shrink, unique formula with exceptional strength and adhesion for use on worn surfaces. It evens sticks to glass, steel, aluminum and wood, so is ideal for areas abutting these materials. Can be feather edged or applied up to 3 in thickness, using multiple layers. Ideal to anchor bolts, railings and other fixtures into concrete or to build-up worn or broken step corners without using forms. Use for vertical or horizontal, above or below grade patch and repair projects both inside and out. Will not cause acidic reaction with aluminum. Drylok powdered masonry waterproofer is formulated to fill and seal porous masonry walls against water, even under pressure, by becoming an actual part of the original surface. An aggregate type material, Drylok powdered masonry waterproofer is ideal as a base coat, as well as a finish coat. Environmentally friendly. Asphalt Emulsion. For spray or brush application to existing or new, green or damp concrete and masonry surfaces. For below-greade applications to foundations, both poured concrete and CMU block. No odor, soap and water cleanup.
Damtite 03550 Masonry Waterproofer United Gilsonite 22113 Masonry Waterproofer Henry RC065070 Roofers Choice Foundation Coating
High-performance masonry waterproofers used for above or below-grade applications. alkali-resistant coating provides excellent waterproofing protection with a decorative finish for all masonry, cinder and concrete block, poured concrete, brick, stucco, basement, retaining walls and foundations. Fast-drying, low-odor, tintable and easy-to-clean-up. Reduces radon gas penetration through concrete block walls. Covers up to 125 sq-ft/gal. Drylok natural look sealer is a non-yellowing protective coating that can be used as a sealer or concrete curing membrane. As a sealer, Drylok natural look sealer penetrates deep to seal and protect masonry against acids, alkalis, road salts, de-icing compounds, household cleaners, gasoline, oil and weathering. Protects against dusting, staining and spalling. As a concrete hardener, When applied to freshly poured concrete, after the surface has set for 24 hr and excess water has been removed, Drylok natural look sealer will control water evaporation resulting in maximum concrete hardness. Cures to a tough, flexible, weather-resistant film. Because of its ability to retain its pliability, the coating resists damage which may result from expansion and contraction caused by weather and temperature variation. Use as an exterior underground foundation coating and dampproofer for brick, concrete, cement block and similar surfaces. May be used as an underground exterior foundation coating and dampproofer. Covers approximately 1 to 2 gal per 100 sq-ft.
Gardner-Gibson 0125-GA Roof And Foundation Coating Henry PR175070 Premier Foundation Coating Henry PR175042 Premier Foundation Coating
A thin, liquid-applied coating designed to seal and penetrate exterior concrete and masonry surfaces while providing a moisture barrier. It can also be used as an anti-corrosive coating for below-grade steel or metal piping. Seals and protects wood footings from decay and termites. For exterior use only. A cold applied liquid asphalt in a solvent system. Penetrating type coating formulated to provide a durable, weather-resistant film. For long wearing protection of foundation coating. Also use to dampproofing above and below-grade exterior concrete and masonry walls and foundations that are thoroughly dry. Covers 1.5 to 2 gal per 100 sq-ft. Depending upon the porosity and roughness of the surface. Premier 175 Foundation? coating non-fibered dries to a tough, flexible, weather-resistant film. Because of its ability to retain its flexibility, resists damage which may result from expansion and contraction caused by weather, temperature variation and normal building vibration.
Drylok 27513 Ready-To-Use Concrete Sealer Zinsser 5001 Watertite Waterproofing Paint Damtite 02501 Waterproof Coating
latex base Drylok? Masonry waterproofer is the manageable way to solve water seepage problems. Reduces radon gas penetration by reducing vapor transfer. WATERTITE? professional mold and Mildew-Proof? waterproofing paint has a unique oil-base formula that combines a state-of-the-art waterproofing resin with Portland cement to create a coating that stops up to 34 lb psi of water pressure. It also contains a mildewcide to prevent the growth of mold and mildew for a minimum of 10 years after application, making it great for basements and other masonry surfaces where mold and mildew can be problematic. A gray Portland cement-base, waterproofing coating for sealing, protecting and decorating walls and surfaces constructed of poured concrete, concrete/cinder block, masonry, stone, brick or stucco. Ideal as parge coat for exterior, below-grade applications instead of using regular cement which does not waterproof. Safe coating for sealing the inside of drinking water concrete tanks and cisterns.
Damtite 01211 Waterproofer Powder Drylok 27613 Latex Based Masonry Waterproofer Damtite 01501 Waterproof Coating
A Portland cement-based, waterproofing coating for sealing, protecting and decorating wall sand surfaces constructed of poured concrete, concrete, cinder block, masonry, stone, brick or stucco. Safe coating for sealing the inside of drinking water concrete tanks and cisterns. Eliminates dampness, resists mold, mildew and flaking, chalking while beautifying and sealing all pores and voids. Unlike ready-mix paints which can only be applied to dry surfaces, this product is made for use on wet or dry surfaces. It also reduces radon gas infiltration. Wear protective gloves and goggles. Latex base Drylok masonry waterproofer is the manageable way to solve water seepage problems. Reduces radon gas penetration by reducing vapor transfer. Heavy-duty, Portland cement-base, waterproofing coating for sealing, protecting & decorating walls and surfaces constructed of poured concrete, concrete/cinder block, masonry, stone, brick or stucco. Safe coating for sealing the inside of drinking water concrete tanks and cisterns.
SEALER CONCRETE CLEAR GAL SEALER CONCRETE GRAY GAL Drylok 28613 Latex Based Masonry Waterproofer
Henry? 635 is a high-performance, high-solids concrete sealer that is easy to apply, quick drying, nonflammable and UV stable. Applied at a minimum of two coats, Henry 635 is designed to protect all exterior absorbent concrete and masonry surfaces on residential and commercial applications, including driveways, sidewalks, patios, courtyards, walkways, pool decks and most vertical concrete surfaces. It is especially suited to seal Henry? toppings and the gray version can be used to create a uniform appearance over both a repaired area and the adjacent concrete or masonry surfaces. Henry 635 is durable and abrasion-resistant when applied properly. Henry? 635 is a high-performance, high-solids concrete sealer that is easy to apply, quick drying, nonflammable and UV stable. Applied at a minimum of two coats, Henry 635 is designed to protect all exterior absorbent concrete and masonry surfaces on residential and commercial applications, including driveways, sidewalks, patios, courtyards, walkways, pool decks and most vertical concrete surfaces. It is especially suited to seal Henry? toppings and the gray version can be used to create a uniform appearance over both a repaired area and the adjacent concrete or masonry surfaces. Henry 635 is durable and abrasion-resistant when applied properly. latex base Drylok? extreme masonry waterproofer is the next generation in waterproof coatings. Features flexible encapsulated polymers which squeeze into the masonry for the ultimate in waterproof protection. Specially formulated to resist mildew growth on the dry paint film with the incorporation of an environmentally-friendly green biocide. Fully transferable 15 years warranty. Tested to ASTM D-7088 Resistance to hydrostatic pressure at 15 psi and ASTM D6904 resistance to wind driven rain. Reduces Radon gas penetration.
SEALER CONCRETE WET LOOK 1 GAL SEALER CONCRETE NATRAL LOOK 1G Valspar 589 Latex Block Filler
ROCKSOLID wet look concrete sealer seals and protects concrete and masonry surfaces from the damaging effects of water, chemicals and UV light. The water-base, film-forming formula provides a protective barrier to keep water out, protect against stains and extend the life of your concrete while leaving a wet look, high-gloss finish. ROCKSOLID natural look concrete sealer seals and protects concrete and masonry surfaces from the damaging effects of water, chemicals and UV light. The water-base, film-forming formula provides a protective barrier to keep water out, protect against stains and extend the life of your concrete while leaving a natural look, low-gloss finish. Fast-drying Interior/Exterior Latex Block Filler seals porous masonry surfaces. Fills the voids in cement and cinder blocks, reducing the amount of finish coat needed to coat such surfaces. Provides an ideal primer surface for latex and oil-base topcoats. Formulated for professional painter use in residential, commercial, institutional and industrial applications. NOTE: Exterior use requires topcoating with exterior paints for maximum performance.
Weiman 5134 Stone Spray-N-Seal Penetrating Sealer Damtite 02451 Waterproofer Powder Drylok 22115 Natural Look Sealer
Protects natural stone surfaces from staining. For stone countertops, floors, walls, vanities and even grout. Also for sealing all types of masonry, stucco, concrete and sanded grout. Has special blend of polymers that bond to the stone and creates a water and oil repellant membrane to prevent staining and allows the stone to breathe and release moisture vapors. Safe for interior and exterior use and is UL Classified for slip resistance. Coverage varies depending on surface. A Portland cement-based, waterproofing coating for sealing, protecting and decorating wall sand surfaces constructed of poured concrete, concrete, cinder block, masonry, stone, brick or stucco. Safe coating for sealing the inside of drinking water concrete tanks and cisterns. Eliminates dampness, resists mold, mildew and flaking, chalking while beautifying and sealing all pores and voids. Unlike ready-mix paints which can only be applied to dry surfaces, this product is made for use on wet or dry surfaces. It also reduces radon gas infiltration. Wear protective gloves and goggles. Drylok natural look sealer is a non-yellowing protective coating that can be used as a sealer or concrete curing membrane. As a sealer, Drylok natural look sealer penetrates deep to seal and protect masonry against acids, alkalis, road salts, de-icing compounds, household cleaners, gasoline, oil and weathering. Protects against dusting, staining and spalling. As a concrete hardener, When applied to freshly poured concrete, after the surface has set for 24 hr and excess water has been removed, Drylok natural look sealer will control water evaporation resulting in maximum concrete hardness.
MOISTURE STOP 1 GALLON Damtite 01451 Waterproofer Powder Valspar 82092 Natural Look Waterproofer
Rust-Oleum Moisture stop penetrates into concrete and reacts with the free calcium and water to form a gel in cracks, pores and capillaries to protect against the ingress of water and contaminants. This allows surfaces that were previously uncoatable, due to moisture, to be coated. A Portland cement-based, waterproofing coating for sealing, protecting and decorating wall sand surfaces constructed of poured concrete, concrete, cinder block, masonry, stone, brick or stucco. Safe coating for sealing the inside of drinking water concrete tanks and cisterns. Eliminates dampness, resists mold, mildew and flaking, chalking while beautifying and sealing all pores and voids. Unlike ready-mix paints which can only be applied to dry surfaces, this product is made for use on wet or dry surfaces. It also reduces radon gas infiltration. Wear protective gloves and goggles. Valspar? natural look protective sealer locks out weather and scuffs with a tough, penetrating layer of invisible protection.
   
 
1 2