|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dundas Jafine's aluminum snap lock pipe can be used for venting most types of heating units. This product features an easy to close snap lock system for easy opening and closing of the pipe and is available in various sizes. This product is 0.012 in thick and will not meet most building codes for in wall use.
|
The Lambro 4 in ABS white plastic quick fit clothes dryer exhaust elbow is ideal accessory for venting a clothes dryer. This elbow is used for clothes dryer exhaust venting applications when connecting the flexible duct to the clothes dryer. The elbow labeled "A" has a rubber gasket that slides onto the dryer exhaust outlet securely without the need for a clamp. When using UL 2158A semi-rigid duct, simply thread the elbow into one end of the duct (no clamp needed). The kit includes a 4 in worm gear clamp to connect foil flex UL 2158A duct to this elbow. This elbow allows you to inspect and clean your clothes dryer vent duct without the need of tools to disassemble and assemble.
|
Flexible aluminum foil LamaFlex duct is ideal for applications where building codes require use of all aluminum duct. The duct has a maximum operating temperature of 250 deg F.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Aluminum film laminate.
|
semi-rigid aluminum duct is ideal for applications where building codes require use of all aluminum duct. The duct is totally non-combustible with a maximum operating temperature of 400 deg F.
|
The Lambro flexible semi-rigid 4 in x 8 ft duct is ideal for general-purpose venting applications including bathroom fan and kitchen range hood exhausting. The corrugations throughout the duct prevents collapsing and allows for easily bending the duct when needed. The class 0 aluminum is corrosion-resistant non-combustible and fire-resistant with a maximum operating temperature of 482?F. Check local building codes prior to installation. Do not use for clothes dryer installations (UL 2158A duct must be used).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flexible aluminum foil LamaFlex duct is ideal for applications where building codes require use of all aluminum duct. The duct has a maximum operating temperature of 250 deg F.
|
UL listed for clothes dryer connection. Aluminum semi-rigid flexible duct. Without clamps. Bulk packed only.
|
UL 181, Class 1 air connector label for general venting. Multiply design of metalized polyester with 1 in pitch steel wire support.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The semi-rigid aluminum duct is ideal for applications where code requires an all aluminum product. This duct is non-combustible with a maximum operating temperature of 435 deg F. Dundas Jafine is now pleased to offer a new UL Listed marked Marked version of the semi-rigid aluminum duct. This particular duct is UL2158A listed and marked and can be used in applications where the dryer manufacturer calls for a UL version of an all aluminum product. The UL duct is thicker than the standard version and new manufacturing technology incorporated into the duct allows for easy rotation and therefore more durable handling of the duct by the contractor.
|
The semi-rigid aluminum duct is ideal for applications where code requires an all aluminum product. This duct is totally non-combustible with a maximum operating temperature of 435 deg F. Dundas Jafine is now pleased to offer a new UL listed and marked version of the semi-rigid aluminum duct. This particular duct is UL2158A listed and marked and can be used in applications where the dryer manufacturer calls for a UL version of an all aluminum product. The UL rated duct is thicker than the standard version and new manufacturing technology incorporated into the duct allows for easy rotation and therefore more durable handling of the duct by the contractor.
|
SilverDuct is a wire helix hose with a UL 2158A label for clothes dryer transition duct. SilverDuct has steel wire support and a multi-ply design of aluminum, polyester laminate and metalized polyester.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
V530 E-Z-Fasten pipe is a durable semi-rigid flexible duct designed for clothes dryer venting. One factory-installed crimped fitting snaps to other SAF-TDUCT components. One soft-cuff end with slots forms easily. These pre-treated ends save time and provide more secure connections.
|
The ProFlex? dryer duct is ideal for both gas and electric clothes dryer applications. This duct is UL2158A listed and marked for safe dryer venting and is constructed of heavy-duty, fire-resistant, 4-ply aluminum foil laminate that encapsulates a high density, corrosion-resistant wire helix. This forms an airtight and easy-to-use air duct. This duct will not support combustion.
|
Space saving aluminum dryer vent duct is ideal for use in tight clothes dryer installations. The duct allows for the dryer to be placed 3 in from the wall for optimum space utilization. The 2-piece aluminum construction allows for these ducts extend from 24 to 41 in L.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ideal when all aluminum duct is required by code in some gas and electric dryer applications. Totally noncombustible with a maximum operating temperature of 435??F. The UL duct is thicker than the standard version.
|
Flexible aluminum foil LamaFlex duct is ideal for applications where building codes require use of all aluminum duct. The duct has a maximum operating temperature of 250 deg F.
|
V400 Series Readi-Pipe is a durable semi-rigid flexible duct designed for clothes dryer venting. Factory made soft-cuff pre-treated ends. These pre-treated ends save time and provide more secure connections.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
the semi-rigid aluminum duct is ideal for applications where code requires an all aluminum product. This duct is totally non-combustible with a maximum operating temperature of 435 deg F. DUNDAS-JAFINE is now pleased to offer a new UL Listed and Marked version of the semi-rigid aluminum duct. This particular duct is UL2158A listed and marked and can be used in applications where the dryer manufacturer calls for a UL version of an all aluminum product. The UL duct is thicker than the standard version and new manufacturing technology incorporated into the duct allows for easy rotation and therefore more durable handling of the duct by the contractor.
|
V830 Builder's Best snap lock pipe is a durable semi-rigid flexible duct designed for clothes dryer venting. Factory-installed fittings snap to other SAF-TDUCT components. These pre-treated ends save time and provide more secure connections.
|
UL listed for clothes dryer connection. Aluminum semi-rigid flexible duct. Includes two clamps. Polybagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Lambro 4 in aluminum rigid snap-lock pipe is ideal accessory can be used in many general venting applications. The all aluminum pipe 60 in pipe can be cut to length with tin snips when needed. The pipe has 1-crimped end and 1-straight end for easy installations. Check local building codes prior to installation.
|
The DUNDAS-JAFINE ProFlex? dryer to duct connector kit offers a safe and efficient way to connect your dryer transition duct to the back of your dryer. The kit includes a 4 x 8 ft ProFlex? dryer transition duct a plastic connector piece as well as an optional plastic extension piece for those dryers with recessed exhaust ports. The connector and extension piece is made of polypropylene containing Fire-retardant additive which meets UL94 VO standards for flame resistance. Once attached, it helps the duct from being crushed and improves the air flow from the back of the dryer. The connector piece is also friction fit to the dryer for an easy connection that does not require clamps or duct tape for attachment and can be easily removed for cleaning. The ProFlex? dryer transition duct in this kit is UL2158A listed and marked for safe dryer venting.
|
DUNDAS-JAFINE space saver aluminum dryer vent ducts are ideal for use in tight fitting clothes dryer applications. The ducts allow the dryer to be placed 3 in from the wall for optimum space utilization. With a two-piece aluminum construction these ducts extend from 28 to 45 in length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dundas Jafine's semi-rigid dryer to duct connector kit offers a safe and efficient way to connect your dryer transition duct to the back of your dryer. The kit includes a 4 x 8 ft semi-rigid aluminum duct, a plastic connector piece as well as an optional plastic extension piece for those dryers with recessed exhaust ports. The connector and extension piece is made of polypropylene containing fire retardant additive which meets UL94 VO standards for flame resistance. Once attached, it helps the duct from being crushed and improves the air flow from the back of the dryer. The connector piece is also friction fit to the dryer for an easy connection that does not require clamps or duct tape for attachment and can be easily removed for cleaning.
|
Space saving aluminum dryer vent duct is ideal for use in tight clothes dryer installations. The duct allows for the dryer to be placed 3 in from the wall for optimum space utilization. The 2-piece aluminum construction allows for these ducts extend from 18 to 30 in.
|
This all inclusive all metal dryer hook-up kit is truly the ultimate installation kit for both the contractor and consumer. This kit includes a 4 x 8 ft UL 2158A listed and marked semi-rigid aluminum duct, two attached all metal heavy-duty elbows and two 4 in metal galvanized worm gear clamps. The semi-rigid duct is UL 2158A labeled and approved for safe dryer venting. It is thicker than our standard non UL duct and like all aluminum ducts is totally non-combustible. New manufacturing technologies incorporated into this duct also allow for easy rotation, adding durability during installation. The two metal elbows are flame-resistant for a safe and longer-lasting connection and are designed to achieve tight 0 to 90 deg turns.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 0 to 18 in periscope is a rigid aluminum clothes dryer duct designed for tight space installations. Its two-piece, non-reversible telescoping design allows precise adjustment for close dryer-to-vent connections. A part of the SAF-T-DUCT dryer venting series.
|
UL 181, Class 1 air connector label for general venting. Multiply design of metalized polyester with 1 in pitch steel wire support.
|
The Lambro 4 in aluminum rigid snap-lock pipe is ideal accessory can be used in many general venting applications. The all aluminum pipe 24 in pipe can be cut to length with tin snips when needed. The pipe has 1-crimped end and 1-straight end for easy installations. Check local building codes prior to installation.
|
|
|
