|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Vulcan pry bar nail puller is made of dropped forged steel with hexagon steel construction for enhanced strength. It's a single claw tool.
|
The Vulcan claw is made of heat treated carbon steel blade with a square plastic handle.
|
The Vulcan pry bar nail puller is made from drop-forged steel with hexagon steel construction for enhanced strength. It's a double claws tool and be used for precision nail pulling and prying.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heat-treated for durability with a special extracting claw and a beveled nail slot.
|
Estwing's handy Claw is the excellent tool for getting under and removing nails. The 10 in steel tool comes with a comfortable vinyl grip.
|
Manufactured with a 20% lighter, skeletonized steel alloy for ultimate mobility in your everyday carry. This bar utilizes precision-honed claws for high-speed extraction and minimized damage to materials. The cat's paw and in-line nail pullers, along with dual strike zones, optimize our bar for ultimate utility on any jobsite. Comes ready for SRS retention lanyards for safety when working overhead or at heights. Our bar is also drop-tested at 100 ft to determine suitability for the harshest job sites in the world. As always, all our tools are backed by our five-star, hassle-free lifetime warranty. With each purchase made, we support our nation's heroes by donating 3% of proceeds to veteran and first responder causes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Forged, tempered steel with a flat claw for easy wedging and minimal wood damage. Rocker head provides excellent leverage. Rust-resistant powder-coat finish.
|
Manufactured with an up to 20% lighter advanced skeleton design, this nail puller is excellent used for removing small nails, embedded nails and headless nails with the two nail pullers and precision-honed claws, which allows for extreme versatility and minimal damage. The 20% lighter-yet-durable carbon steel of this tool gives credit to the comfortability of its grip, allowing for precise pulling of sharp nails with the sniper control design. The dual strike zones are designed for accurate and rapid nail extraction on any jobsite. And with a guarantee to deliver a lifetime of mission capability on the world's toughest jobsites, this nail puller has been drop tested at 100 ft to surpass Mil-Spec standards. All spec ops Tools are backed by our five-star, hassle-free lifetime warranty and with each purchase made, we support our nation's heroes by donating 3% of proceeds to veteran and first responder causes.
|
Made from tempered, forged high-carbon alloy steel. Flat surface allows users to pry molding and trim reducing material damage, polished, beveled claws for nail pulling and prying.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 10 in claw bar is precise and durable. Its flat striking face allows claw to be driven under deeply embedded nails. With polished beveled claws are ideal for precision nail pulling and prying, tempered body to help reduce spalling and its forged, HCS construction, this tool is ideal for small demolition projects.
|
The 8 in molding bar is precise and durable. Its flat striking face allows claw to be driven under deeply embedded nails. With polished flat surface and beveled claws for prying molding and trim, tempered body to help reduce spalling and its forged, HCS construction, this tool is ideal for removing trim with minimal damage.
|
Surfaces ground for precision nail pulling and prying resulting in less material damage, high visibility, durable finish helps prevent loss and makes it easy to find the tool on the job-site. Nail slot provides access for improved functionality and nail pulling. Precision tips for fast access and reduced damage to salvaged materials. Radius design increases durability, strength and better prying leverage. Striking pad assists users with penetration and prying.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our 9 in finish nail puller is equipped with our SMOOTHPULL high-leverage head delivering maximum leverage for quick nail removal. The durable grip is wear-resistant for continual comfort over the life of the tool and reduces vibration when the nail puller is struck by a hammer. The beveled edges of the nail puller claws allow for a better grip on hard-to-reach nails. The sharpened claws and integrated nail removal feature on the head of the tool provides you with effective ways to remove embedded nails, reducing damage to surrounding materials. The unique head geometry, combined with optimized 6D-12D nail slots, delivers increased efficiency on the jobsite.
|
Estwing's nail puller is extremely strong and durable and can pull a variety of fasteners. The nail puller claws are precise and sharp to remove embedded or headless nails with ease and minimal wood damage. Shaped, rounded head design gives you improved leverage. Precision thin claw design enables you to get into hard-to-reach places. Attractive design features polished ends.
|
Forged, tempered steel with a flat claw for easy wedging and minimal wood damage. Rocker head provides excellent leverage. Rust-resistant finish.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add to your everyday carry collection with our up to 20% lighter advanced skeleton design. This 11 in nail puller is better used on construction and demolition sites to help remove stubborn and deeply sunken nails. The cat's paw features two nail pullers for jobsite durability and is made with durable HCS and dual strike zones to accurately and rapidly remove nails. This tool is manufactured with precision-honed claws to easily remove embedded or headless nails. And with a assurance to deliver a lifetime of mission capability on the world's toughest jobsites, this nail puller has been drop tested at 100 ft to surpass Mil-Spec standards. All spec ops Tools are backed by our five-star, hassle-free lifetime warranty and with each purchase made, we support our nation's heroes by donating 3% of proceeds to veteran and first responder causes.
|
Designed for extracting deeply embedded nails, the VAUGHAN Nail Pullers are forged of 5/8 in hex, high-carbon steel and have a rust-resistant powder-coated finish. The polished claws have been hardened and tempered for strength and long-life. The Nail Pullers are available in three lengths and are made in the USA with global materials.
|
Estwing's 12 in and 15 in nail pullers have polished ends and are extremely strong and durable, these tools can pull a variety of fasteners. The nail puller claws are precise and sharp to remove imbedded or headless nails with ease and minimal wood damage. Shaped rounded head design gives you improved leverage. Precision thin claw design enables you to get into hard to reach places.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heat-treated for durability with a double end, 90 deg and 30 deg, puller and fully sharpened claw tips.
|
The 10 in claw bar with extra wide strike face helps to prevent damage to wood by exposing the head of the nail.
|
Our 10 in nail puller is equipped with our SMOOTHPULL high-leverage head delivering maximum leverage for quick nail removal. The durable grip is wear-resistant for continual comfort over the life of the tool and reduces vibration when the nail puller is struck by a hammer. The beveled edges of the nail puller claws allow for a better grip on hard-to-reach nails. The sharpened claws and integrated nail removal feature on the head of the tool provides you with effective ways to remove embedded nails, reducing damage to surrounding materials. The unique head geometry, combined with optimized 8D-16D nail slots, delivers increased efficiency on the jobsite.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Estwing's 12 in and 15 in nail pullers have polished ends and are extremely strong and durable, these tools can pull a variety of fasteners. The nail puller claws are precise and sharp to remove imbedded or headless nails with ease and minimal wood damage. Shaped rounded head design gives you improved leverage. Precision thin claw design enables you to get into hard to reach places.
|
Estwing's 12 in and 15 in nail pullers have polished ends and are extremely strong and durable, these tools can pull a variety of fasteners. The nail puller claws are precise and sharp to remove imbedded or headless nails with ease and minimal wood damage. Shaped rounded head design gives you improved leverage. Precision thin claw design enables you to get into hard to reach places.
|
The VAUGHAN Bear Claw nail pullers feature forged, tempered steel with a flat claw designed for easy wedging and minimal wood damage, ensuring efficient and precise work. The rocker head provides excellent leverage, making tasks easier and more effective. They feature a rust-resistant powder-coat finish for enhanced durability and longevity. Made in the USA with global Materials.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made from tempered, forged, high-carbon alloy steel with a flat striking face and polished, beveled claws for nail pulling and prying.
|
Surfaces ground for precision nail pulling and prying resulting in less material damage, high visibility, durable finish helps prevent loss and makes it easy to find the tool on the job-site. Nail slot provides access for improved functionality and nail pulling. Precision tips for fast access and reduced damage to salvaged materials. Radius design increases durability, strength and better prying leverage. Striking pad assists users with penetration and prying.
|
Our 12 in nail puller is equipped with our SMOOTHPULL? high-leverage head delivering maximum leverage for quick nail removal. The durable grip is wear-resistant for continual comfort over the life of the tool and reduces vibration when the nail puller is struck by a hammer. The beveled edges of the nail puller claws allow for better grip on hard to reach nails. The sharpened claws and integrated nail removal feature on the head of the tool provide you with effective ways to remove embedded nails, reducing damage to surrounding materials. The unique head geometry, combined with optimized 10D to 20D nail slots, deliver increased efficiency on the jobsite.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tackle your next renovation or demolition project with the latest innovations from Crescent. Our new tools are designed around powerful innovations that allow the user to attack projects from the excellent angle, adjust your tool to fit the task at hand and just get the job done faster and easier than before. This series of tools offers a wide array of demolition and renovation tools. All Crescent pry bars have precision ground edges that make it easier to access tight spaces and help minimize damage to finished areas, as well as a crow bar end with a nail puller slot for standard crow bar use. Durable two-tone dual material grips provide comfort, control and added safety.
|
The 10 in molding bar extra wide strike surface coupled with it's 40% wider head helps to prevent wall damage when prying trim and molding.
|
Tackle your next renovation or demolition project with the latest innovations from Crescent. The Code Red tools are designed around powerful innovations that allow the user to attack projects from the best angle, adjust your tool to fit the task at hand and just get the job done faster and easier than before. The Code Red Series of tools offers a wide array of demolition and renovation tools. The indexing nail puller has 14 locking positions for quick adjustments up to 180 deg for maximum leverage. Designed to reach between studs, joist and other tight work spaces, this indexing nail puller will help you get the job done every time.
|
|
|
