|
|
|
|
|
|
|
|
|
|
|
|
|
|
Using an easy out pump manifold filter is the easiest way to maximize spray performance while also saving time and money by extending the life of your equipment and reducing downtime. Use 60 mesh for materials such as latex primers, latex and latex enamels.
|
The gun filter helps reduce tip plugging and provides a better quality finish by eliminating unwanted particles from the spray pattern. Use 60 mesh for materials such as primer and latex paint.
|
The gun filter helps reduce tip plugging and provides a better quality finish by eliminating unwanted particles from the spray pattern. Use 100 mesh for thinner materials such as stain and lacquer.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Graco Inlet Strainer, Specifications: 7/8 in UNF, Nylon, Suitable for: 390, 490, Ultra 395/495/595, Ultra Max 695 Lo-Boy, GMAX 3400, LineLazer 3400, FinishPro 390, Finish Pro 395
|
Designed specifically for the RAC X FF LP SwitchTips, these single seal gaskets help keep the tip in place.
|
The TrueAirless? spray tip with SoftSpray Technology delivers a softer spray pattern to make it easier to deliver a professional quality finish. Achieve greater control and less overspray on different surfaces with a wide range of coatings, from stains to exterior paints. The 4 in spray pattern is ideal for narrow surfaces such as trim, fences and decks. The 0.011 in hole size optimal for spraying thinner materials like semi-transparent stains, water sealers, stains or polyurethanes. Less overspray shortens clean-up time with less wasted material.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The TrueAirless? spray tip with SoftSpray Technology delivers a softer spray pattern to make it easier to deliver a professional quality finish. Achieve greater control and less overspray on different surfaces with a wide range of coatings, from stains to exterior paints. 6 in spray pattern ideal for narrow surfaces such as fences, decks and furniture. The 0.015 in hole size optimal for spraying medium materials like interior or exterior latex, primers, solid stain or enamels. Less overspray shortens clean-up time with less wasted material.
|
The TrueAirless? spray tip with SoftSpray Technology delivers a softer spray pattern to make it easier to deliver a professional quality finish. Achieve greater control and less overspray on different surfaces with a wide range of coatings, from stains to exterior paints. 8 in spray pattern ideal for larger surfaces such as interior or exterior walls. The 0.015 in hole size is better choice for spraying interior or exterior paints, primers and enamels. Less overspray shortens clean-up time with less wasted material.
|
The TrueAirless? spray tip with SoftSpray Technology delivers a softer spray pattern to make it easier to deliver a professional quality finish. Achieve greater control and less overspray on different surfaces with a wide range of coatings, from stains to exterior paints. 8 in spray pattern ideal for larger surfaces such as interior or exterior walls. The 0.017 in hole size optimal for spraying medium materials like interior or exterior latex, primers, solid stain or enamels. Less overspray shortens clean-up time with less wasted material.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 10 in RAC X Tip extension is ideal for hard to reach areas such as soffits, stairways and vaulted ceilings. Includes RAC X HandTite guard. Can be combined for extended reach up to 6 ft.
|
The BlueMax II whip hose provides more flexibility and increased operator control at the gun. This BlueMax II whip hose has a 3/16 in Dia and is 3 ft long.
|
The reverse-a-clean (RAC) 313 RAC X SwitchTip is designed for narrow surfaces. The 313 SwitchTip has a 0.013 in orifice and produces a 6 to 8 in fan. Reverse the SwitchTip to easily clear clogs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Reverse-A-Clean (RAC) 315 RAC X switch tip is designed for narrow surfaces. The 315 switch tip has a 0.015 in orifice and produces a 6 to 8 in fan. Reverse the switch tip to easily clear clogs.
|
The reverse-a-clean (RAC) 413 RAC X switch tip produces an 8 to 10 in fan and has a 0.013 in orifice. Reverse the switch tip to easily clear clogs.
|
The Reverse-A-Clean (RAC) 415 RAC X SwitchTip produces an 8 to 10 in fan and has a 0.015 in orifice. Reverse the SwitchTip to easily clear clogs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Reverse-A-Clean (RAC) 515 RAC 5 switch tip produces a 10 to 12 in fan and has a 0.015 in orifice. Reverse the switch tip to easily clear clogs. Used for residential, commercial or industrial applications. Best used with materials ranging from lacquers, latex paints and mastics.
|
The Reverse-A-Clean (RAC) 517 RAC X SwitchTip produces a 10 to 12 in fan and has a 0.017 in orifice. Reverse the SwitchTip to easily clear clogs.
|
The Reverse-A-Clean (RAC) 1221 RAC X Wide RAC SwitchTip produces a 24 in fan and has a 0.021 in orifice. Reverse the SwitchTip to easily clear clogs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 20 in RAC X tip extension is ideal for hard to reach areas such as soffits, stairways and vaulted ceilings. Includes RAC X HandTite guard. Can be combined for extended reach up to 6 ft.
|
The 30 in RAC X tip extension is ideal for hard to reach areas such as soffits, stairways and vaulted ceilings. Includes RAC X HandTite guard. Can be combined for extended reach up to 6 ft.
|
Spray at up to 50% lower pressure with the reverse-a-clean (RAC) 208 fine finish low pressure (FF LP) RAC X SwitchTip. This fine finish tip produces a 4 to 6 in fan pattern and a 0.008 in orifice. Reverse the SwitchTip to easily clear clogs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 210 Fine Finish Low Pressure (FF LP) RAC X SwitchTip. This fine finish tip produces a 4 to 6 in fan pattern and a 0.01 in orifice, ideal for thin materials. Reverse the SwitchTip to easily clear clogs.
|
Spray at up to 50% lower pressure with the Reverse-A-Clean 212 Fine Finish Low Pressure RAC X SwitchTip. This fine finish tip produces a 4 to 6 in fan pattern and has a 0.012 in orifice, ideal for finishing materials. Reverse the SwitchTip to easily clear clogs.
|
Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 310 fine finish low pressure (FF LP) RAC X SwitchTip. This fine finish tip produces a 6 to 8 in fan pattern and a 0.01 in orifice, ideal for thin materials. Reverse the SwitchTip to easily clear clogs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 312 Fine Finish Low Pressure (FF LP) RAC X SwitchTip. This fine finish tip produces a 6 to 8 in fan pattern and a 0.012 in orifice. Reverse the SwitchTip to easily clear clogs.
|
Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 314 fine finish low-pressure (FF LP) RAC X SwitchTip. This fine finish tip produces a 6 to 8 in fan pattern and has a 0.014 in orifice, ideal for finishing materials. Reverse the SwitchTip to easily clear clogs.
|
Spray at up to 50% lower pressure with the reverse-a-clean (RAC) 410 fine finish low pressure (FF LP) RAC X SwitchTip. This fine finish tip produces a 8 to 10 in fan pattern and a 0.01 in orifice. Reverse the SwitchTip to easily clear clogs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 415 low-pressure (LP) RAC X SwitchTip. This low-pressure tip produces a 8 to 10 in fan pattern and has a 0.015 in orifice. Reverse the SwitchTip to easily clear clogs. For large surface areas such as walls and ceilings.
|
Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 515 low-pressure (LP) RAC X SwitchTip. This low-pressure tip produces a 10 to 12 in fan pattern and has a 0.015 in orifice. Reverse the SwitchTip to easily clear clogs. For large surface areas such as walls and ceilings.
|
Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 417 Low Pressure (LP) RAC X SwitchTip. This low pressure tip produces a 8 to 10 in fan pattern and has a 0.017 in orifice. Reverse the SwitchTip to easily clear clogs. For large surface areas such as walls and ceilings.
|
|
|
