|
|
|
|
|
|
|
|
|
|
|
|
|
|
The outdoor Accents decorative hardware product line features connectors and fasteners that bring beauty and strength to custom outdoor living structures. The APVST flat strap works for lumber in both nominal and rough sizes. It can be used to connect two beams together or added to any project as a decorative accent. Part of the Avant Collection.
|
The Simpson Strong-Tie outdoor accents line of decorative hardware features connectors and fasteners that bring beauty and strength to custom outdoor living structures. The deck joist tie attaches 2X joists to the side of 4X or larger support posts. It installs quickly and easily with the outdoor Accents structural wood screw and hex head washer for the look of a bolted connection. Part of the Avant collection.
|
The Simpson Strong-Tie outdoor accents line of decorative hardware features connectors and fasteners that bring beauty and strength to custom outdoor living structures. The deck joist tie attaches 2X joists to the side of 4X or larger support posts. It installs quickly and easily with the outdoor Accents structural wood screw and hex head washer for the look of a bolted connection. Part of the Avant collection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Outdoor Accents flat L-straps from Simpson Strong-Tie bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. This L-strap is easily installed with Outdoor Accents structural screws and hex head washers. Part of the Avant Collection.
|
Outdoor Accents? flat T-straps from Simpson Strong-Tie? bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. This T-strap is easily installed with Outdoor Accents? structural screws and hex head washers. Part of the Avant collection.
|
Outdoor Accents flat L-straps from Simpson Strong-Tie bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. This L-strap is easily installed with Outdoor Accents structural screws and hex head washers. Part of the Avant Collection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Outdoor Accents flat L-straps from Simpson Strong-Tie bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. These straps are easily installed with Outdoor Accents structural screws and hex head washers.
|
Outdoor Accents flat T-straps from Simpson Strong-Tie bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. This T-strap is easily installed with Outdoor Accents structural screws and hex head washers. Part of the Avant collection.
|
Outdoor Accents flat T-straps from Simpson Strong-Tie bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. Install with Outdoor Accents structural screws and hex-head washer (sold separately) for a decorative look.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The STHD is an embedded strap tie hold own offering high-loads in both wood and cold-formed steel construction. When installed on the forms with the StrapMate strap holder or other holding device, the unique design of this cast-in-place strap tie hold own delivers enhanced stability before and during the pour to help prevent both parallel and perpendicular movement. This results in accurate positioning of the strap and reduced possibility of spalling.
|
The STHD is an embedded strap-tie holdown offering high-loads in both wood and cold-formed steel construction. When installed on the forms with the StrapMate? strap holder or other holding device, the unique design of this cast-in-place strap-tie holdown delivers enhanced stability before and during the pour to help prevent both parallel and perpendicular movement. This results in accurate positioning of the strap and reduced possibility of spalling.
|
The DTT1Z and DTT1SS deck tension ties provide strong, reliable lateral load connections that help decks meet the International Residential Code (IRC) requirement for a 750 lb connection to the supporting structure at four locations per deck, as outlined in the 2015, 2018, 2021 and 2024 IRC R507.9.2(2). These connectors are ideal for both new construction and retrofits, offering a safe and code-compliant way to secure decks to homes-without the need to access interior floor joists. With models available in ZMAX and Type 316 stainless steel, the DTT1 Series offers flexibility for a range of environmental conditions. The DTT1Z is a ZMAX-coated tension tie designed for typical deck applications. It installs on the narrow or wide face of a single 2X joist using Strong-Drive SD connector screws or nails and can be anchored with a 3/8 in bolt, lag screw (with washer) or Strong-Drive SDWH Timber-Hex HDG screw. For added convenience, the DTT1Z is also available in the DTT1Z-KT kit, which includes (4) DTT1Z connectors, (4) Strong-Drive SDWH Timber-Hex HDG screws (SDWH27800G) and (26) #9 x 1 1/2 in Strong-Drive SD connector screws providing a complete hardware solution for one code-compliant deck installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members.
|
The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members.
|
The L is designed for beam-to-column applications. This versatile utility strap is L-shaped, making it ideal for transferring tension loads in a variety of applications. The L features well-placed fastener holes and can easily be installed with nails or bolts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The T is designed for beam-to-column applications. This versatile utility strap is T-shaped, making it ideal for transferring tension loads in a variety of applications. The T features well-placed fastener holes and can easily be installed with nails or bolts.
|
The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members.
|
The HRS is designed to resist tension forces between two wood members. The HRS6, HRS8 and HRS12 can be installed on the edge of 2X members. These straps are load-rated, precut straps designed for quick installation and optimal performance. The HRS installs where top or bottom plates are cut, at wall intersections and as ridge ties.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The HRS is designed to resist tension forces between two wood members. The HRS6, HRS8 and HRS12 can be installed on the edge of 2X members. These straps are load-rated, precut straps designed for quick installation and optimal performance. The HRS installs where top or bottom plates are cut, at wall intersections and as ridge ties.
|
Outdoor Accents flat L-straps from Simpson Strong-Tie bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. These straps are easily installed with Outdoor Accents structural screws and hex head washers.
|
The T is designed for beam-to-column applications. This versatile utility strap is T-shaped, making it ideal for transferring tension loads in a variety of applications. The T features well-placed fastener holes and can easily be installed with nails or bolts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The HRS is designed to resist tension forces between two wood members. The HRS6, HRS8 and HRS12 can be installed on the edge of 2X members. These straps are load-rated, precut straps designed for quick installation and optimal performance. The HRS installs where top or bottom plates are cut, at wall intersections and as ridge ties.
|
Outdoor Accents flat T-strap from Simpson Strong-Tie bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. These straps are easily installed with Outdoor Accents structural screws and hex head washers.
|
The hr is designed to resist tension forces between two wood members. The HRS416Z is designed for 4X members. These straps are load-rated, precut straps designed for quick-installation and optimal performance. The hr installs where top or bottom plates are cut, at wall intersections and as ridge ties.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members.
|
The ST is designed to resist tension loads in a variety of applications. This economical strap-tie is ideal for installation where top or bottom plates are cut, at wall intersections and as ridge ties. The ST is a load-rated, precut strap designed for quick-installation and optimal performance.
|
The DJT14Z deck joist tie is designed to attach 2X deck joists to the side of 4X or larger support posts. The DJT14Z can be installed with either nails or bolts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The DPTZ deck post tie products are used to attach 4 x 4 (DPT7Z) vertical posts to the side of stringers, rims or other wood members.
|
The MTS provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the rafter or heel of a truss. The MTS has a small bend section to reduce interference at the transition points between the two members.
|
The ST is designed to resist tension loads in a variety of applications. This economical strap tie is ideal for installation where top or bottom tracks are cut, at wall intersections and as ridge ties. The ST is load-rated, precut strap designed for quick installation and optimal performance.
|
|
|
