Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL FITTINGS > GROUNDING RODS/CLAMPS
Sort By:
1 2
Halex 16010B Ground Clamp Eritech ZWP1J Grounding Pipe Clamp Halex 93592 Ground Clamp
Indoor or outdoor applications. Use to secure the grounding wire to a 1/2 in through 1 in pipe. UL listed. Wire size fits #10 to 2 AWG. Bolted water pipe clamps made of zinc die-cast. Wire range 8 solid to 2 stranded. UL listed. Connects grounding wire to the grounding rod. Connects grounding wire to the grounding rod.
SCREW GROUNDING RND HD GRN Gardner Bender GGP-1502 Grounding Pigtail Halex 93591 Ground Clamp
Green round washer head screw for switch and outlet boxes. GB? offers a convenient grounding accessories line of products suitable for most job requirements. This grounding pig tail is made from #12 AWG stranded wire. One end is terminated with a bare fork terminal. The other end is a captured screw. Connects grounding wire to the grounding rod.
Gardner Bender 14-GRC Ground Clamp Gardner Bender GGC-1508 Ground Clip GROUND WIRE CLIP GRN 14-10AWG
Connects grounding wire to the grounding rod. Convenient grounding accessories include products suitable for most job requirements. Southwire? Ground Clip, Wire Size: 14 to 10 AWG, Steel, Green, Dimensions: 0.1 in H x 2 in W
Halex 36010 Ground Clamp Eritech CWP1J Grounding Pipe Clamp Eritech CWP1JU Grounding Pipe Clamp
Indoor or outdoor applications. Use to secure the grounding wire to a 1/2 in through 1 in pipe. UL listed. Wire size fits #10 to 2 AWG. Bolted water pipe grounding clamp. UL listed. Made of corrosion-resistant copper alloy. Bolted water pipe clamps made from high-strength corrosion-resistant copper alloy. Connects grounding wire to the grounding rod. Range 10 solid to 2 stranded. UL listed.
Halex 36019 Ground Clamp Siemens Energy ECGB10 Ground Bar Kits Halex 36020 Ground Clamp
Indoor or outdoor applications. Use to secure the grounding wire to a 1/2 in through 1 in pipe. UL listed. Wire size fits #10 to 2 AWG. For equipment grounding provision. #14 to 4 AWG, 60/75 deg Celsius, Cu/A1. Wire size fits #10 to 2 AWG. Use to secure the grounding wire to a 1-1/4 to 2 in or 2-1/2 to 4 in pipe. Bronze. UL listed.
Cutler-Hammer GBK10P Ground Bar Kits Square D PK7GTACP Ground Bar Kits Cutler-Hammer GBK14P Ground Bar Kits
Cutler-Hammer Ground Bar Kit, Number of Terminals: 10, Wire Size: 14 to 10 AWG, 14 to 4 AWG, 4.7 in L, 2.3 in W, 1/2 in H By grounding the system, it helps prevent electrical shock hazards and ensures that stray electrical currents are safely directed to the earth. It acts as a centralized location where all ground wires from branch circuits are securely connected. It provides a neat and organized way to terminate multiple ground conductors, making the panel easier to inspect and maintain. This is a Ground Lug kit compatible for both QO and Homeline Load Center. It has 7 number of circuits which accepts (1) #14 to # 4 or (2) #14 or #12 copper or (1) #12 to #4 or (2) #12 or #10 aluminum. It is in consumer package. Eaton Ground Bar Kit, Number of Terminals: 14, Wire Size: 14 to 4 AWG, 5.69 in L
Eritech EK17 Direct Burial Perpendicular Ground Clamp Halex 63299 Ground Screw Eritech EK16 Direct Burial Ground Clamp
Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and concrete. Pipe range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Rebar range from #4 (10 mm) to #8 (25 mm). Ground rod range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Conductor range from #10 (5.5 sq-mm) to #2 (25 sq-mm). UL listed. Indoor or outdoor applications. Use to ground a wiring device to a steel outlet box. Green color. Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and concrete. Pipe range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Rebar range from #4 (10 mm) to #8 (25 mm). Ground rod range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Conductor range from #10 (5.5 sq-mm) to #2 (25 sq-mm). UL listed.
Cutler Hammer GBK21P Ground Bar Kit Eritech 811260UPC Grounding Rod Schneider PK9GTACP Ground Bar Kit
Cutler-Hammer Ground Bar Kit, 21 Terminals Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel. By grounding the system, it helps prevent electrical shock hazards and ensures that stray electrical currents are safely directed to the earth. It acts as a centralized location where all ground wires from branch circuits are securely connected. It provides a neat and organized way to terminate multiple ground conductors, making the panel easier to inspect and maintain. This is a Ground Lug kit compatible for both QO and Homeline Load Center. It has 9 number of circuits which accepts (1) #14 to # 4 or (2) #14 or #12 copper or (1) #12 to #4 or (2) #12 or #10 aluminum. It is in consumer package.
Square D PK12GTACP Ground Bar Kits Eritech 615840UPC Grounding Rod Erico 815860UPC Grounding Rods
By grounding the system, it helps prevent electrical shock hazards and ensures that stray electrical currents are safely directed to the earth. It acts as a centralized location where all ground wires from branch circuits are securely connected. It provides a neat and organized way to terminate multiple ground conductors, making the panel easier to inspect and maintain. This is a Ground Lug kit compatible for both QO and Homeline Load Center. It has 12 number of circuits which accepts (1) #14 to # 4 or (2) #14 or #12 copper or (1) #12 to #4 or (2) #12 or #10 aluminum. It is in consumer package. Copper bonded, resists corrosion better than galvanized rods, allowing for a 30 year service life in most soils. Uniform plating thickness, average tensile strength of 80000 psi and straightness tolerance of 0.010 in per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA and ANSI/NEMA GR-1. Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel.
Square D PK15GTACP Ground Bar Kits Siemens EC2GB152 Ground Bar Kit With Terminal 2/0 Lug Schneider PK18GTACP Ground Bar Kit
By grounding the system, it helps prevent electrical shock hazards and ensures that stray electrical currents are safely directed to the earth. It acts as a centralized location where all ground wires from branch circuits are securely connected. It provides a neat and organized way to terminate multiple ground conductors, making the panel easier to inspect and maintain. This is a Ground Lug kit compatible for both QO and Homeline Load Center. It has 15 number of circuits which accepts (1) #14 to # 4 or (2) #14 or #12 copper or (1) #12 to #4 or (2) #12 or #10 aluminum. It is in consumer package. For equipment grounding provision. #14 to 4 AWG, 60/75 deg Celsius, Cu/A1. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts one #14 - #4 copper wire or one #12 - #4 aluminum wire, two #14 - #12 copper wire or two #12 - #10 aluminum wire. ANSI certified and UL listed.
   
 
1 2