|
|
|
|
|
|
|
|
|
|
|
|
|
|
high-impact CPVC construction for use in hot or cold fluid systems up to 180 deg F. Use with water and approved chemicals. 1/2 in MHT outlet. Beige color body with red wheel handle. TPE seal for chemical resistance and long life. Polypropylene handle and stem. Tapered valve seat allows precise flow adjustment. Complies with all applicable ASTM and ANSI standards.
|
High-impact CPVC construction for use in hot or cold fluid systems up to 180 deg F. Use with water and approved chemicals. 1/2 in MHT outlet. Beige color body with red wheel handle. TPE seal for chemical resistance and long-life. Polypropylene handle and stem. Tapered valve seat allows precise flow adjustment. Complies with all applicable ASTM and ANSI standards.
|
Rising stem, neoprene seal washer, 3/4 in hose thread outlet, cast iron handle. Threaded ends comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7, code ends comply with ANSI B16.18.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rising stem, six-point cast iron handle, 3/4 in hose thread outlet, complies with ASME A112.18.1, threaded ends comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7, certified to NSF 61.
|
Easy quarter-turn On/Off operation regulates water flow from a trickle to wide open. Compact, low lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon? seats and rust-resistant handle. 125 psi max working pressure. 3/4 in hose thread outlet. IAPMO NSI/NSF 61 approved. Pipe threads comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, solder (sweat) ends comply with ANSI-B16.18. Bin box display packaging. Each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton.
|
Neoprene seal disc. 3/4 in male hose thread. Pipe threads comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. Rising stem certified to NSF 61.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rising stem, six-point cast iron handle, 3/4 in hose thread outlet, complies with ASME A112.18.1, threaded ends comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7, certified to NSF 61.
|
3/4 in hose threaded outlet, cast iron handle. Meets NSF/ANSI 61-9. Nose threads comply to ANSI B1.20.7.
|
Easy quarter-turn On/Off operation regulates water flow from a trickle to wide open. Compact, low lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon? seats and rust-resistant handle. 125 psi max working pressure. 3/4 in hose thread outlet. IAPMO NSI/NSF 61 approved. Pipe threads comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, solder (sweat) ends comply with ANSI-B16.18. Bin box display packaging. Each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Neoprene seal disc. 3/4 in male hose thread. Pipe threads comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. Rising stem certified to NSF 61.
|
3/4 in hose threaded outlet, cast iron handle. Meets NSF/ANSI 61-9. Nose threads comply to ANSI B1.20.7.
|
Rising stem, neoprene seal washer, 3/4 in hose thread outlet, cast iron handle. Threaded ends comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7, code ends comply with ANSI B16.18.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rising stem, six-point cast iron handle, 3/4 in hose thread outlet. Threaded ends comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7.
|
Rising stem, six-point cast iron handle, 3/4 in hose thread outlet. Threaded ends comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7.
|
Built to allow drainage from boiler drains, this boiler drain valve by ProLine Series allows you to easily maintain your boiler by releasing any sediment that may have accumulated. This valve is also good to use as a washing machine hookup or for general-purpose use with an outdoor hose.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features heavy pattern rough brass, 1-piece O-ring bonnet and coated wheel handle.
|
The arrowhead brass 221LF boiler drain has a 1/2 in MIP connection. The 221LF includes Arrowhead brass's exclusive O-ring bonnet and stem design (no packaging nut to tighten) and a 3 year limited warranty.
|
Arrowhead Brass Boiler Drain, 3/4 in Connection, MIP x MHT Connection, Number of Ports/Ways: 1, 8 to 9 gpm, 125 psi, Actuator Type: Manual, Temperature Rating: 140 deg F, Body Material: Red Brass, Trim Material: Aluminum
|
|
|
