|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diablo's thin kerf trim saw blade is ideal for portable and low powered saws on the jobsite. Diablo's trim saw blade is proven to extend run time on Porter Cable?, Saw Boss and similar trim saws.
|
Diablo's Finish Trim Saw Blade for Wood is ideal for portable and low powered saws on the jobsite. Diablo's trim saw blade is proven to extend run time on DeWALT and similar trim saws.
|
Diablo finish blades are the ideal choice for excellent rips and crosscuts using a portable saw. They deliver a smoother edge than framing blades, but still provide an excellent combination of cutting speed and long-life. A great choice for jobsite finish cuts in 1X, decking, fencing, fascia and plywood.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Featuring tungsten carbide teeth for maximum durability and a thin kerf for fast, smooth cuts, DeWALT small diameter construction saw blades power through a variety of building materials with ease. Ribbed heat vents allow blades to run at cooler temperatures, reducing blade flexing and binding. Anti-stick coating minimizes friction and gum-up.
|
Diablo's finishing blade is ideal for smooth finish crosscuts in hardwood, softwood or plywood. These blades are the ideal choice when seeking high-quality rips and crosscuts using a portable saw. The combination of Diablo's application specific TiCo? hi-density carbide teeth and a super thin-kerf blade deliver smooth cuts, increased cutting speed and longer life. A great choice for jobsite finish cuts in 1X, decking, fencing, fascia and plywood.
|
The excellent value for an economy blade. Corrosion-resistant coating helps prevent rusting. Precision ground teeth for smooth, accurate cuts; slots for straighter cuts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Construction-grade carbide teeth for longer life with thin kerf for fast cuts; 400 grit diamond ground teeth for a smooth finish. Precision tensioned and balanced blade.
|
Thin kerf, 0.083 in, saw blades for miter saws and table saws. Precision tensioned and balanced blade for an accurate cut; #400 grit diamond ground teeth for a smooth finish. Alternate top bevel, 15 deg hook angle.
|
Ultra-thin kerf, 0.063 in, for more cuts per charge. Face ground carbide teeth for fast, clean cuts. Aggressive hook angle for fast cuts. Construction carbide teeth for longer life.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Make precise cuts with these large diameter circular saw blades that deliver up to 3X life. Designed for increased accuracy, they feature optimized tooth geometry, specifically placed body slots and ultra sharp carbide tipped teeth for crisp, clean cutting. Built to exceed expectations during cutting applications, each blade is specifically designed by tooth count to increase performance and life.
|
Diablo's finishing saw blade for wood is ideal for smooth finish crosscuts in hardwood, softwood or plywood. Diablo finish blades are the ideal choice for excellent rips and crosscuts using a portable saw. They deliver a smoother edge than framing blades, but still provide an excellent combination of cutting speed and long-life. A great choice for jobsite finish cuts in 1X, decking, fencing, fascia and plywood.
|
Thin kerf saw blade for miter saws and table saws. Used for crosscutting oak, pine, malamine, plywood and moulding. Alternate top bevel, .071" plate, .098" kerf, 15 degree hook angle.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Thin kerf, 0.071 in saw blade for circular saws. Innovative heat vents and expansion slots for straighter cuts. Reinforced shoulder for durability. Designed for framing and ripping. Alternate top bevel, 20 deg hook angle.
|
Ultra finish blades let trim crews get the most out of sliding or chop style miter saws, as well as jobsite or workshop table saws. The special cutting geometry and high-tooth count produce extremely smooth cuts while minimizing grabbing or blowout. Flawless crosscuts in wood with minimal rework. Flawless finish in melamine and veneered plywood.
|
Thin kerf saw blades for miter saws and table saws. Alternate top bevel, 1.6 mm plate, 0.095 in kerf.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Thin kerf saw blade for table saws. Used for crosscutting oak, pine, malamine, plywood and moulding. Alternate top bevel, .087" plate, .0118" kerf, 15 degree hook angle.
|
For miter/slide miter and table saw. Non-stick permashield coating. Axial shear face grind tooth geometry..087" ultra thin kerf, 10-degree hook angle, and 7,000 max rpm.
|
Thin kerf, .087", saw blade for sliding miter saws and radial arm saws. Laser cut stabilizer vents for reduced vibration and precise cuts. Durable MicroGrain Titanium Carbide for razor sharp cuts and long life. PermaShield permanent coating prevents gumming and corrosion. Used for crosscutting oak, pine, malamine, plywood and moulding. Alternate top bevel, .063" plate, 7 degree hook angle.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For on-the-job cutting of wood, non ferrous metal such as copper pipe, aluminum extrusions, brass plate, plastics and laminates. For miter/slide miter saws. Triple chip grind tooth design. .091" thin kerf, negative 5-degree hook angle and 6,000 max rpm.
|
Thin kerf saw blades for miter saws and table saws. Alternate top bevel, 1.6 mm plate, 0.095 in kerf.
|
Construction-grade carbide teeth for longer life with thin kerf for fast cuts; 400 grit diamond ground teeth for a smooth finish. Precision tensioned and balanced blade.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For miter/slide miter saw. Non-stick permashield coating. Axial shear face grind tooth geometry. .098" ultra thin kerf, 7-degree hook angle, and 7,000 max rpm.
|
This ultimate cut-off blade's teeth actually polish the material as it cuts. New laser-cut anti-vibration slots practically eliminate the vibration that resonates in standard blades, producing glass-smooth finishes. With a finish this ideal you won't need stabilizers.
|
Diablo ultra finish blades offer the quality that fine cabinetmakers expect with the capability to handle the extreme conditions of professional construction. Diablo blade produces a remarkably clean, chip-free cut that requires little to no sanding. Ideal for crosscutting oak, pine, melamine, veneer plywood and delicate molding.
|
|
|
