Home > ELECTRICAL > ROUGH ELECTRICAL > FUSES & BREAKERS
Choose a sub category:
CIRCUIT BREAKERS - SNGL POLE CIRCUIT BREAKERS - DBL POLE CIRCUIT BREAKERS - MAIN
CIRCUIT BREAKERS - ARC FAULT CIRCUIT BREAKERS - GFCI FUSES-CARTRIDGE/LINKS/ADAPTER
FUSES-PLUG/ADAPTERS FUSES-SPECIALTY CIRCUIT BREAKERS - FOUR POLE
FUSES-CARTRIDGE /LINKS/ADAPTER SUB FEED LUG KITS
Sort By:
1 2 3 ... 17
Bussmann AGX-7X5-RP Electronic Fast Acting Fuse with Clip Strips Bussmann Fusetron NON-15 Cartridge Bussmann Fusetron NON-25 Cartridge
Fast acting, 1/4 in x 1 in glass tube fuse. 125 V maximum. Cartridge fuses are used to protect motors and branch circuits where higher amps or V ratings are required. general-purpose fuses have no time delay and protect fuse panels, appliances and branch circuits. Cartridge fuses are used to protect motors and branch circuits where higher amps or V ratings are required. general-purpose fuses have no time delay and protect fuse panels, appliances and branch circuits.
Bussmann NON Cartridge Low Voltage Fast Acting Fuse Bussmann NON Cartridge Low Voltage Fast Acting Fuse Bussmann ABC-10 Electronic Fast Acting Fuse
Cartridge fuses are used to protect motors and branch circuits where higher amps or volt ratings are required. General-purpose fuses have no time delay and protect fuse panels, appliances and branch circuits. Cartridge fuses are used to protect motors and branch circuits where higher amps or V ratings are required. general-purpose fuses have no time delay and protect fuse panels, appliances and branch circuits. Ceramic tube construction, for use in microwave ovens. 1/4 x 1-1/4 in physical size, CSA certified, UL listed.
Bussmann ABC-20 Electronic Fast Acting Fuse GE THQL1120 Type THQL Q-Line Standard Circuit Breaker GE THQL1130 Type THQL Q-Line Standard Circuit Breaker
Ceramic tube construction, for use in microwave ovens. 1/4 in x 1-1/4 in physical size, CSA certified, UL listed. Copper-to-copper connections, calibrated for optimum trip performance, heat-resistant thermoset cases and covers, cemented calibration screw. Type THQL 1 in per pole. May be used, when marked to accept, with American Switch, Arrow Hart, Bryant, General Switch, GTE, Sylvania, most ITE, Murray, Westinghouse Type BR, Challenger and Crouse-Hinds. 15 to 30 A 14 to 8 cu or 12 to 8 al AWG wire, 35 to 60 A 8 to 3 cu or 8 to 2 al AWG wire. UL listed, HACR rated. 1 in module, 120/240 V, 10,000 AIR. Copper-to-copper connections, calibrated for optimum trip performance, heat-resistant thermoset cases and covers, cemented calibration screw. Type THQL 1 in per pole. May be used, when marked to accept, with American Switch, Arrow Hart, Bryant, General Switch, GTE, Sylvania, most ITE, Murray, Westinghouse Type BR, Challenger and Crouse-Hinds. 15 to 30 A. 14 to 8 cu or 12 to 8 al AWG wire. 35 to 60 A. 8 to 3 cu or 8 to 2 al AWG wire. UL listed, HACR rated. 1 in module, 120/240 V.
GE THQL1115 Type THQL Q-Line Standard Circuit Breaker BREAKER CIRCUT BLACK 1POLE 30A BREAKER CIRCUT BLACK 1POLE 20A
Copper-to-copper connections, calibrated for optimum trip performance, heat-resistant thermoset cases and covers, cemented calibration screw. Type THQL 1 in per pole. May be used, when marked to accept, with American Switch, Arrow Hart, Bryant, General Switch, GTE, Sylvania, most ITE, Murray, Westinghouse Type BR, Challenger and Crouse-Hinds. 15 to 30 A 14 to 8 cu or 12 to 8 al AWG wire, 35 to 60 A 8 to 3 cu or 8 to 2 al AWG wire. UL listed, HACR rated. 1 in module, 120/240 V, 10,000 AIR. Copper-to-copper connections, calibrated for optimum trip performance, heat-resistant thermoset cases and covers, cemented calibration screw. Nearly identical to Type THQL with the same design and performance, yet only taking up 1/2 the space, 1/2 in per pole. UL listed, HACR rated. 15 and 20 A SWD, switching duty rated, suitable for 120 V fluorescent lighting loads. 15 to 25 A #14 to 8 cu or #12 to 8 al AWG wire, 30 to 50 A #8 to 4 cu or #8 to 2 al AWG wire. 3-9/32 in H x 1/2 in W x 2-3/8 in D. 120/240 V, 10,000 AIR. Copper-to-copper connections, calibrated for optimum trip performance, heat-resistant thermoset cases and covers, cemented calibration screw. Nearly identical to Type THQL with the same design and performance, yet only taking up 1/2 the space, 1/2 in per pole. UL listed, HACR rated. 15 and 20 A SWD, switching duty rated, suitable for 120 V fluorescent lighting loads. 15 to 25 A #14 to 8 cu or #12 to 8 al AWG wire, 30 to 50 A #8 to 4 cu or #8 to 2 al AWG wire. 3-9/32 in H x 1/2 in W x 2-3/8 in D. 120/240 V, 10,000 AIR.
BREAKER CIRCUT BLACK 1POLE 15A Bussmann GMA Cartridge Fast Acting Fuse With Indicator Bussmann GMA Cartridge Fast Acting Fuse With Indicator
Copper-to-copper connections, calibrated for optimum trip performance, heat-resistant thermoset cases and covers, cemented calibration screw. Nearly identical to Type THQL with the same design and performance, yet only taking up 1/2 the space, 1/2 in per pole. UL listed, HACR rated. 15 and 20 A SWD, switching duty rated, suitable for 120 V fluorescent lighting loads. 15 to 25 A #14 to 8 cu or #12 to 8 al AWG wire, 30 to 50 A #8 to 4 cu or #8 to 2 al AWG wire. 3-9/32 in H x 1/2 in W x 2-3/8 in D. 120/240 V, 10,000 AIR. Fast-acting for maximum protection. Series GMA. 5 mm x 20 mm glass tube. Fast-acting for maximum protection. Series GMA. 5 mm x 20 mm glass tube.
Bussmann GMA Cartridge Fast Acting Fuse With Indicator Bussmann GMA Cartridge Fast Acting Fuse With Indicator Bussmann GMA Cartridge Fast Acting Fuse With Indicator
JANDORF GMA Cartridge Fast Acting Fuse, 250 V, 2.5 A, Resistance: 0.04 Ohm, Interrupt Rating: 100 A, 10 kA, Fuse Type: Fast-Acting, Element Type: Single, Indicator Type: Non-Indicating, Rejection/Non-Rejection: Non-Rejection, Terminal Type: Ferrule, Body Material: Glass, 5 mm Dia, 20 mm L Fast-acting for maximum protection. Series GMA. 5 mm x 20 mm glass tube. Fast-acting for maximum protection. Series GMA. 5 mm x 20 mm glass tube.
Bussmann GMA Cartridge Fast Acting Fuse With Indicator Bussmann GMA Cartridge Fast Acting Fuse With Indicator Bussmann GMA Cartridge Fast Acting Fuse With Indicator
Fast-acting for maximum protection. Series GMA. 5 mm x 20 mm glass tube. Fast-acting for maximum protection. Series GMA. 5 mm x 20 mm glass tube. Fast-acting for maximum protection. Series GMA. 5 mm x 20 mm glass tube.
Bussmann GMA Cartridge Fast Acting Fuse With Indicator Bussmann GMA Cartridge Fast Acting Fuse With Indicator MES Q115 Standard Miniature Circuit Breaker
Fast-acting for maximum protection. Series GMA. 5 mm x 20 mm glass tube. Fast-acting for maximum protection. Series GMA. 5 mm x 20 mm glass tube. Non-interchangeable trip. 120 VAC, 10,000 AIR. Will replace American Switch, Westinghouse Type BR, Bryant, Challenger, Sylvania, Crouse-Hinds, Murray, Frank Adams, General Electric (Full-size only), General Switch, I-TE, Gould, Montgomery Ward and Sears. UL listed, HACR rated. 15 A and 20 A UL Listed for frequent switching applications, 120 VAC fluorescent lighting. 1 in per pole.
GE THQL1140 Type THQL Q-Line Standard Circuit Breaker GE THQL1150 Type THQL Q-Line Standard Circuit Breaker GE THQP150 Type THQP Q-Line Standard Circuit Breaker
Copper-to-copper connections, calibrated for optimum trip performance, heat-resistant thermoset cases and covers, cemented calibration screw. Type THQL 1 in per pole. May be used, when marked to accept, with American Switch, Arrow Hart, Bryant, General Switch, GTE, Sylvania, most ITE, Murray, Westinghouse Type BR, Challenger and Crouse-Hinds. 15 to 30 A 14 to 8 cu or 12 to 8 al AWG wire, 35 to 60 A 8 to 3 cu or 8 to 2 al AWG wire. UL listed, HACR rated. 1 in module, 120/240 V, 10,000 AIR. Copper-to-copper connections, calibrated for optimum trip performance, heat-resistant thermoset cases and covers, cemented calibration screw. Type THQL 1 in per pole. May be used, when marked to accept, with American Switch, Arrow Hart, Bryant, General Switch, GTE, Sylvania, most ITE, Murray, Westinghouse Type BR, Challenger and Crouse-Hinds. 15 to 30 A 14 to 8 cu or 12 to 8 al AWG wire, 35 to 60 A 8 to 3 cu or 8 to 2 al AWG wire. UL listed, HACR rated. 1 in module, 120/240 V, 10,000 AIR. Copper-to-copper connections, calibrated for optimum trip performance, heat-resistant thermoset cases and covers, cemented calibration screw. Nearly identical to Type THQL with the same design and performance, yet only taking up 1/2 the space, 1/2 in per pole. UL listed, HACR rated. 15 and 20 A SWD, switching duty rated, suitable for 120 V fluorescent lighting loads. 15 to 25 A #14 to 8 cu or #12 to 8 al AWG wire, 30 to 50 A #8 to 4 cu or #8 to 2 al AWG wire. 3-9/32 in H x 1/2 in W x 2-3/8 in D. 120/240 V, 10,000 AIR.
GE THQP140 Type THQP Q-Line Standard Circuit Breaker Bussmann ABC Electronic Miniature Fast Acting Fuse CIRCUIT BREAKER 1POLE 1IN 30A
Copper-to-copper connections, calibrated for optimum trip performance, heat-resistant thermoset cases and covers, cemented calibration screw. Nearly identical to Type THQL with the same design and performance, yet only taking up 1/2 the space, 1/2 in per pole. UL listed, HACR rated. 15 and 20 A SWD, switching duty rated, suitable for 120 V fluorescent lighting loads. 15 to 25 A #14 to 8 cu or #12 to 8 al AWG wire, 30 to 50 A #8 to 4 cu or #8 to 2 al AWG wire. 3-9/32 in H x 1/2 in W x 2-3/8 in D. 120/240 V, 10,000 AIR. Ceramic tube construction, for use in microwave ovens. 1/4 in x 1-1/4 in physical size, CSA certified, UL listed. Single-pole 1" circuit breaker features 10,000 AIR and 120/240 VAC. Uses a thermal-magnetic tripping mechanism for overload and short-circuit protection. Compatible with Homeline load centers and CSED devices. ANSI certified and UL Listed.
   
 
1 2 3 ... 17