|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6567 is a set of two white nylon floor guides for a single door that is any thickness. Often used on pocket doors as well as bi-pass door systems. Used by several door manufacturers.
|
N 6563 is a white nylon floor guide for 1-3/8 in THK doors. A universal design. At 1-1/8 in tall, it provides a taller than normal guide for most standard thickness closet doors.
|
N 6706 is a bottom mount pivot used by many bi-fold door manufacturers. The 3/8 in Dia nylon base houses a 1/4 in pivot with a hex head nut for adjustment.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6562 is a three-piece adjustable floor guide. Made of white nylon, the guides at each end can be adjusted inward to accommodate doors 3/4 to 1-3/8 in THK. Used by many closet door manufacturers. The guides extend 3/4 in from the floor. For taller guides see N 6760 or N 6761.
|
These sliding panel door finger pulls are constructed of stamped steel and they come finished in a satin nickel plating. They feature a 5/16 in deep-recessed area and fit into 3/4 in Dia holes. These finger pulls are used on by-passing sliding Closet Doors, medicine cabinets and other furnishings and they are used by a variety of sliding door manufacturers.
|
Plated steel, universal design fits a 3/4 in Dia hole.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6761 is a three-piece adjustable floor guide. Made of white nylon, the 1-1/4 in tall guides at each end can be adjusted inward to accommodate doors 3/4 to 1-3/8 in THK. Used by many closet door manufacturers.
|
This is a single wheel, top hung, side mounted adjustable roller bracket with a 1 in convex nylon roller that fits onto the back wardrobe door panel. The stamped steel adjustable bracket has a 3/4 in offset and fits onto a 3/4 to 1-3/8 in THK door. Primarily used on Cox door systems, it may also be found on a variety of other wardrobe door manufacturer's doors. For deeper offsets see Prime-Line parts N 6514 and N 6515.
|
Held in place by two nails used by many wardrobe & door manufacturers. Includes two pull handles, four brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits Cox wardrobe doors in top hung side-mounting applications. Steel offset adjustable bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in THK by-passing doors up to 50 lb. Includes 2 #8 x 3/4 in Phillips pan head screws.
|
Fits Cox wardrobe doors in top hung side-mounting applications. Steel offset adjustable bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in THK by-passing doors up to 50 lb. Includes 2 #8 x 3/4 in Phillips pan head screws.
|
Plated steel, includes two brass nails for installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6661 is a bi-pass floor guide that can be used universally on most wardrobe doors systems. The nylon guides are adjustable to accommodate 3/4 to 1-3/8 in closet doors. The carpet riser shim plates can raise the guides from 1/8 to 5/8 in above the floor to accommodate the height of the carpet.
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
N 6560 is a two-piece adjustable floor guide. Made of white nylon, the guides can be adjusted to accommodate doors 3/4 to 1-3/8 in THK by using the slots in the stamped steel floor base. Used by many closet door manufacturers. The guides extend 5/8 in from the floor.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is a side mounted, top hung wardrobe roller assembly with a single 7/8 in convex nylon wheel for the back sliding door. The stamped steel bracket assembly is adjustable and has an 1/2 in offset. It is fitted onto the wardrobe front door and fits 3/4 in to 1-3/8 in THK doors. Used by Cox door systems as well as a variety of other wardrobe door manufacturers. For the back wardrobe door see Prime-Line part N 6505.
|
This is a side mounted, top hung wardrobe roller assembly with a single 7/8 in convex nylon wheel for the front sliding door. The stamped steel bracket assembly is adjustable and has an 1/4 in offset. It is fitted onto the wardrobe front door and fits 3/4 in to 1-3/8 in THK doors. Used by Cox door systems as well as a variety of other wardrobe door manufacturers. For the back wardrobe door see N 6505.
|
This is a bi-pass floor guide used primarily on closet doors. It has a stamped steel floor base with adjusting slots for the nylon guides to fit into. The nylon guides are adjustable to accommodate 3/4 to 1-3/8 in closet doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
Held in place by two nails used by many wardrobe & door manufacturers. Includes two pull handles, four brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
Fits wardrobe doors in top hung side-mounting applications. Offset adjustable steel bracket with 1/4 in W round edge nylon ball bearing wheel. For 3/4 to 1-3/8 in THK doors. Includes 2 #6 x 5/8 in and 1 #4 x 3/4 in Phillips pan head screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits wardrobe doors in top hung side-mounting applications. Offset adjustable steel bracket with 1/4 in W round edge nylon ball bearing wheel. For 3/4 to 1-3/8 in THK doors. Includes 2 #6 x 5/8 in and 1 #4 x 3/4 in Phillips pan head screws.
|
N 6840 is an adjustable top hung, side mounted bracket with a 1/16 in offset and 7/8 in flat nylon roller used on the front sliding door panel. It fits 3/4 to 1-3/8 in thick doors.
|
This is an adjustable top hung, side mounted bracket with a 3/8 in offset and 7/8 in flat nylon roller used on-the back of a sliding door panel. It fits 3/4 to 1-3/8 in THK doors. Used by a variety of sliding closet or wardrobe doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is a single wheel, top hung, side mounted adjustable roller bracket with a 1 in convex nylon roller that fits onto the front wardrobe door panel. The stamped steel adjustable bracket has a 1/4 in offset and fits onto a 3/4 to 1-3/8 in THK door. Primarily used on Cox door systems, it may also be found on a variety of other wardrobe door manufacturer's doors.
|
Fits Acme wardrobe doors in top hung side-mounting applications. Adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in THK doors. Includes six #8 x 3/4 in Phillips pan head screws. N 7030 and N 7031 have nickel steel brackets.
|
N 6667 is a side mounted, top hung, adjustable wardrobe door roller assembly with a single 7/8 in convex nylon wheel for the front door panel. The stamped steel bracket assembly is adjustable and has a 1/4 in offset. It fits 3/4 to 1-3/8 in thick doors. Used on Atlas closet door systems.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6668 is a side mounted, top hung, adjustable wardrobe door roller assembly with a single 7/8 in convex nylon wheel for the back door panel. The stamped steel bracket assembly is adjustable and has a 1/2 in offset. It fits 3/4 to 1-3/8 in thick doors. Used on Atlas closet door systems. For front door panel see N 6667.
|
Fits Acme wardrobe doors in top hung side-mounting applications. Adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in THK doors. Includes six #8 x 3/4 in Phillips pan head screws. N 7030 and N 7031 have nickel steel brackets.
|
This Prime-line pocket door passage pull in constructed from solid brass and finished with a sleek and stylish nickel-plated finish. Each pocket door pull is easy-to-install and fits 1-3/8 to 1-3/4 in thick doors. It also includes a die-cast pull hook. Comes complete with all the necessary fasteners for a quick and easy installation. The style and construction make the pocket door passage pull an ideal product to choose for your next home-installation project and is guaranteed by Prime-line for up to 1 year against any manufacture's defects.
|
|
|
