|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Outdoor Accents? APRTR connects a 2X member to another member in wood construction applications. Manufactured to high-quality standards to ensure solid performance, this Rigid Tie connector features ZMAX? galvanization with a black powder-coat finish for added corrosion resistance. As part of the Outdoor Accents accessories line, this decorative hardware connector can be used with either the Mission Collection? or Avant Collection?, as well as separately to add flair to any outdoor project.
|
The ML angle combines strength and versatility through the use of Strong-Drive? SDS heavy-duty connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference.
|
The Outdoor Accents? APRTA is designed to connect two wood members at a 90 deg angle. This Rigid Tie angle fastens the members on two sides, eliminating the need for angle bracing. Manufactured to high-quality standards to ensure solid performance, this Rigid Tie connector features ZMAX? galvanization with a black powder-coat finish for added corrosion resistance. As part of the Outdoor Accents accessories line, this decorative hardware connector can be used with either the Mission Collection? or Avant Collection?, as well as separately to add flair to any outdoor project.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Simpson Strong-Tie Skewable Angle, Steel, ZMAX, 3-1/2 in Width, 1-1/4 in Depth, 7-7/8 in Height, 18 ga Material Thickness
|
The ML-angle combines strength and versatility through the use of Strong-Drive? SDS heavy-duty connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference.
|
The ML-angle combines strength and versatility through the use of Strong-Drive? SDS heavy-duty connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ML-angle combines strength and versatility through the use of Strong-Drive? SDS heavy-duty connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference.
|
The RTF is designed to connect two horizontal 2X members to a vertical 2 x 4 in wood applications. Manufactured to high-quality standards to ensure solid performance, this flat rigid tie connector features a galvanized finish for added corrosion resistance.
|
Outdoor Accents? angles tie together beams, rafters and more. The APVA angle makes structural connections between beams and posts more visually appealing. These 90 deg angles make connections stronger and provide consistent, straight corners for a variety of outdoor projects. Part of the Avant collection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The RTB is designed for connecting intersecting 2X members in wood construction applications. Manufactured to high-quality standards to ensure solid performance, this rigid tie features a G90 galvanized finish for added corrosion resistance and requires the use of hot-dip galvanized fasteners. The versatile RTB is ideal for building lattice, railings and shelving.
|
The RTC is a uniquely designed rigid tie connector that connects two horizontal members at a corner to a vertical wood member. Manufactured to high-quality standards to ensure solid performance, this corner rigid tie connector features a galvanized finish for added corrosion resistance.
|
The A34 is a framing angle designed for making a variety of connections. The angle is secured with nails or SD screws and features a speed prong to temporarily hold the connector in place during fastening. The economical A34 provides easy and fast installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The RTU is designed for connecting intersecting members in wood construction applications. Manufactured to high-quality standards to ensure solid performance, this U-shaped rigid tie features a G90 galvanized finish for added corrosion resistance. The versatile RTU is ideal for a variety of projects including fences, railings and utility furniture or any application where a 2X member crosses another.
|
Outdoor Accents? angles tie together beams, rafters and more. The APA angle makes structural connections between beams and posts much more visually appealing. These angles make connections stronger and provide consistent, straight corners for a variety of outdoor projects.
|
The H2.5A single-sided hurricane tie is designed to resist moderate loads at the rafter/truss to-top-plate connection. As part of a continuous load path, the H2.5A resists both lateral and uplift loads. The symmetrical design eliminates the need for separate right and left parts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
An interlock provides alignment control and correct nailing locations. For a rafter-to-face connector, flatten the top-flange into the face plane. The RR may be used with rafters sloped up to 30 deg.
|
Our line of angles provides a way to make a wide range of 90 deg connections.
|
The LSC adjustable stair-stringer connector offers a versatile, concealed connection between the stair-stringer and the carrying header or rim board while replacing costly framing. Field slopeable to all common stair-stringer pitches, the LSC connector is suitable for either solid or notched stringers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The RTC is a uniquely designed rigid tie connector that connects two horizontal members at a corner to a vertical wood member. Manufactured to high-quality standards to ensure solid performance, this corner rigid tie connector features a galvanized finish for added corrosion resistance.
|
Our line of angles provides a way to make a wide range of 90 deg connections.
|
The A35 is a balanced and completely reversible framing angle designed for making a variety of connections. The angle's exclusive bend slot allows instant and accurate field bends for all two and three-way ties. The A35 is secured with nails and features a speed prong to temporarily hold the connector in place for easy and fast installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The H2.5T single-sided hurricane tie is designed to resist moderate loads at the rafter/truss to-top-plate connection. As part of a continuous load path, the H2.5T resists both lateral and uplift loads. H2.5T ties are available in left and right-hand models and can be installed in pairs.
|
The GA angle is a small, versatile angle designed to improve corner stability. The engineered and tested gusset in the angle increases strength for lateral and uplift loads. The GA installs easily with nails, or for increased loads, with Strong-Drive? SD Connector screws.
|
Our line of angles provides a way to make a wide range of 90 deg connections.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our line of angles provides a way to make a wide range of 90 deg connections.
|
Our line of angles provides a way to make a wide range of 90 deg connections.
|
Outdoor Accents? angles tie together beams, rafters and more. The APVA angle makes structural connections between beams and posts more visually appealing. These 90 deg angles make connections stronger and provide consistent, straight corners for a variety of outdoor projects. Part of the Avant collection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The H1A provides a connection between the truss or rafter and the wall of the structure that helps resist wind and seismic forces. The H1A is designed for nominal 2X lumber. These U-shaped hurricane ties provide faster installation than using two single-sided ties. The embossments add stiffness in crucial areas for improved performance.
|
The H2.5A single-sided hurricane tie is designed to resist moderate loads at the rafter/truss to-top-plate connection. As part of a continuous load path, the H2.5A resists both lateral and uplift loads. The symmetrical design eliminates the need for separate right and left parts.
|
The H3 single-sided hurricane tie is designed to resist moderate loads at the rafter/truss to-top-plate connection. As part of a continuous load path, the H3 resists both lateral and uplift loads. H3 ties are available in left and right-hand models and can be installed in pairs.
|
|
|
