Home > PAINT & SUNDRIES > PAINT > PRIMERS & SEALERS > MASONRY SEALERS
Sort By:
1 2
PRIMER UNDERLAYMENT LEVEL 1GAL Weiman 5092 Stone Spray-N-Seal Penetrating Sealer Damtite 01071 Waterproofer Powder
Protects natural stone surfaces from staining. For stone countertops, floors, walls, vanities and even grout. Also for sealing all types of masonry, stucco, concrete and sanded grout. Has special blend of polymers that bond to the stone and creates a water and oil repellant membrane to prevent staining and allows the stone to breathe and release moisture vapors. Safe for interior and exterior use and is UL Classified for slip resistance. Coverage varies depending on surface. Portland-cement base coating. Holds back 22psi of hydrostatic pressure. Safe for drinking water cisterns. Seals, protects and beautifies vertical walls constructed of concrete, masonry, brick or stucco. Eliminates dampness and resists mildew, flaking or chalking while sealing all pores and voids. Helps reduce Radon Gas penetration through concrete block walls. Just add water to powder and mix; brushes on like paint. Mix with Damtite Bonding Additive in place of water for previously-painted or non-porous surfaces (poured concrete). Coverage (varies by porosity of surface and by first or second coat): 7lb to 93 sq ft (8.6 m2); 21lb to 280 sq ft (26 m2); 45lb to 600 sf (55.7 m2).
Damtite 04152 Superpatch Concrete Patch Drylok 00542 Masonry Waterproofer Henry PR1760074 Premier Foundation Coating
SuperPatch is a two-component, multi-purpose, waterproofing mortar for patching, repairing or resurfacing concrete, masonry, stucco and brick, up to 1 in thickness in one application. Exact amount of powder and liquid are included in this container. Just mix the powder with liquid together in a clean container. SuperPatch is a non-shrink, unique formula with exceptional strength and adhesion for use on worn surfaces. It evens sticks to glass, steel, aluminum and wood, so is ideal for areas abutting these materials. Can be feather edged or applied up to 3 in thickness, using multiple layers. Ideal to anchor bolts, railings and other fixtures into concrete or to build-up worn or broken step corners without using forms. Use for vertical or horizontal, above or below grade patch and repair projects both inside and out. Will not cause acidic reaction with aluminum. Decorates and waterproofs masonry walls. Use on above or below grade masonry walls, cinder and concrete blocks, stucco, brick, field stone foundations, retaining walls, basements and foundations. Cleans up with warm, soapy water. Coverage depends on surface porosity. Each 35 lb. will cover 140-210 sq. ft. with the first coat, 210-280 sq. ft. with the second coat. Environmentally friendly. Asphalt emulsion. For spray or brush application to existing or new, green or damp concrete and masonry surfaces. For below grade applications to foundations, both poured concrete and CMU block. No odor, soap and water cleanup.
Damtite 03550 Masonry Waterproofer Henry RC065070 Roofers Choice Foundation Coating Gardner-Gibson 0125-GA Roof And Foundation Coating
High performance masonry waterproofer used for above or below grade applications. Alkali-resistant coating provides excellent waterproofing protection with a decorative finish for all masonry, cinder and concrete block, poured concrete, brick, stucco. Use on basement walls, retaining walls, fountains, birdbaths, planters and more. Fast drying, low odor and tintable to light pastel shades. Easy clean up. Reduces Radon Gas penetration through concrete block walls. Covers up to 150 sq. ft. (11.6 m2) per gallon. Cures to a tough, flexible, weather resistant film. Because of its ability to retain its pliability, the coating resists damage which may result from expansion and contraction caused by weather and temperature variation. Use as an exterior underground foundation coating and dampproofer for brick, concrete, cement block, and similar surfaces. May be used as an underground exterior foundation coating and dampproofer. Covers approximately 1 to 2 gallons per 100 square feet. A thin liquid applied coating designed to seal and penetrate exterior concrete and masonry surfaces while providing a moisture barrier. It can also be used as an anti-corrosive coating for below grade steel or metal piping. Seals and protects wood footings from decay and termites. Covers approximately 70 sq. ft. per gallon.
United Gilsonite 22113 Masonry Waterproofer Damtite 01351 Supertite Masonry Waterproofer Damtite 01211 Waterproofer Powder
Protective coating for masonry surfaces. Prevents moisture damage. Penetrates deep to seal and protects masonry against acids, alkalis, household chemicals, gasoline, oil and salt. Covers up to 400 sq. ft. per gallon depending on surface porosity. Adheres to all types surfaces. A heavy duty, Portland cement coating that includes a dry polymer resin to increase adhesion to all types of masonry surfaces. Eliminates need for liquid bonding agent to add to mix. Seals pores, cracks, voids and smooths rough surfaces. Protects against moisture penetration while beautifying and protecting concrete, stone, masonry, stucco and brick. Use above or below grade, inside or outside. Safe for coating inside of potable water cisterns or concrete water tanks. Holds back 22 psi of hydrostatic pressure. Covers up to 260 sq ft (24.2 sq m) per 35 lb pail. Portland-cement base coating. Holds back 22psi of hydrostatic pressure. Safe for drinking water cisterns. Seals, protects and beautifies vertical walls constructed of concrete, masonry, brick or stucco. Eliminates dampness and resists mildew, flaking or chalking while sealing all pores and voids. Helps reduce Radon Gas penetration through concrete block walls. Just add water to powder and mix; brushes on like paint. Mix with Damtite Bonding Additive in place of water for previously-painted or non-porous surfaces (poured concrete). Coverage (varies by porosity of surface and by first or second coat): 7lb to 93 sq ft (8.6 m2); 21lb to 280 sq ft (26 m2); 45lb to 600 sf (55.7 m2).
Damtite 02501 Waterproof Coating Henry PR175070 Premier Foundation Coating Damtite 01501 Waterproof Coating
Economical, heavy-duty, Portland cement-base coating to seal and protect concrete, masonry, brick, stone and stucco. Apply to wet or dry walls. Breathable coating so no moisture becomes trapped behind the surface. Holds back 12 PSI water pressure. Heavy duty formula. Can be used as an exterior, below grade foundation sealer on concrete block or poured concrete, prior to applying asphaltic-base coatings. Also for sealing and beautifying basement & garage walls, retaining & sea walls; Safe for coating the inside of cisterns for drinking water. A cold applied liquid asphalt in a solvent system. Penetrating type coating formulated to provide a durable, weather resistant film. For long-wearing protection of foundation coating. Also use to dampproofing above and below grade exterior concrete and masonry walls and foundations that are thoroughly dry. Covers 1.5 to 2.0 gallons per 100 sq. ft. depending upon the porosity and roughness of the surface. Economical, heavy-duty, Portland cement-base coating to seal and protect concrete, masonry, brick, stone and stucco. Apply to wet or dry walls. Breathable coating so no moisture becomes trapped behind the surface. Holds back 12 PSI water pressure. Heavy duty formula. Can be used as an exterior, below grade foundation sealer on concrete block or poured concrete, prior to applying asphaltic-base coatings. Also for sealing and beautifying basement & garage walls, retaining & sea walls; Safe for coating the inside of cisterns for drinking water.
Henry PR175042 Premier Foundation Coating Zinsser 5001 Watertite Waterproofing Paint Drylok 27613 Latex Based Masonry Waterproofer
A cold applied liquid asphalt in a solvent system. Penetrating type coating formulated to provide a durable, weather resistant film. For long-wearing protection of foundation coating. Also use to dampproofing above and below grade exterior concrete and masonry walls and foundations that are thoroughly dry. Covers 1.5 to 2.0 gallons per 100 sq. ft. depending upon the porosity and roughness of the surface. Guaranteed to stop up to 34psi of water pressure - twice the strength of other waterproofers. Prevents the growth of mold and mildew on the paint film for up to 5 years. Smooth, non-gritty finish applies easily to wet or dry walls. Ultra low odor oil-base formula has even less odor than latex paint. Great for basements and other interior/exterior above and below grade masonry surfaces. Watertite contains a mildewcide that prevents the growth of mold and mildew on the paint film only. Formulated to waterproof above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basement, and foundations. Tintable. Low Odor. Non-flammable. Resists 10 psi water pressure. Apply with brush and/or roller. Complies with all current VOC requirements. Passes performance requirements of Fed. Spec. TT-P-1411-A. Covers 75 to 125 sq. ft per gallon depending on surface porosity.
Drylok 27513 Ready-To-Use Concrete Sealer Drylok 27514 Latex Based Masonry Waterproofer SEALER CONCRETE CLEAR GAL
SEALER CONCRETE CLEAR GAL
Our Price: $87.99
Formulated to waterproof above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basement, and foundations. Tintable. Low Odor. Non-flammable. Resists 10 psi water pressure. Apply with brush and/or roller. Complies with all current VOC requirements. Passes performance requirements of Fed. Spec. TT-P-1411-A. Covers 75 to 125 sq. ft per gallon depending on surface porosity. Formulated to waterproof above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basement, and foundations. Tintable. Low Odor. Non-flammable. Resists 10 psi water pressure. Apply with brush and/or roller. Complies with all current VOC requirements. Passes performance requirements of Fed. Spec. TT-P-1411-A. Covers 75 to 125 sq. ft per gallon depending on surface porosity. High-performance, high solids concrete sealer that is easy to apply, quick drying, nonflammable and UV stable. Applied at a minimum of two coats, designed to protect all exterior absorbent concrete and masonry surfaces on residential and commercial applications, including driveways, sidewalks, patios, courtyards, walkways, pool decks and most vertical concrete surfaces.
SEALER CONCRETE GRAY GAL Drylok 28613 Latex Based Masonry Waterproofer Valspar 589 Latex Block Filler
SEALER CONCRETE GRAY GAL
Our Price: $87.99
High-performance, high solids concrete sealer that is easy to apply, quick drying, nonflammable and UV stable. Applied at a minimum of two coats, designed to protect all exterior absorbent concrete and masonry surfaces on residential and commercial applications, including driveways, sidewalks, patios, courtyards, walkways, pool decks and most vertical concrete surfaces. For the most demanding conditions. For above or below grade masonry walls, basement walls, retaining walls, foundations, landscape walls, cinder blocks, concrete blocks, bare concrete swimming pools, stucco and brick. Formulated to resist mildew growth on the paint film. Stops 15 psi. Passes ASTM D-7088 Resistance to Hydrostatic pressure and ASTM D-6904 resistance to wind driven rain. Covers 75 to 125 sq. ft per gallon depending on surface porosity. Filler and sealer designed to fill the pores and smooth the surface of rough and porous masonry. Has excellent enamel hold-out. May be top coated with either oil or latex.
SEALER CONCRETE WET LOOK 1 GAL SEALER CONCRETE NATRAL LOOK 1G Damtite 02451 Waterproofer Powder
Seals and protects concrete and masonry surfaces from the damaging effects of water, chemicals, and UV light. For use on driveways, patios, walkways, pool decks, basements and more. Provides a protective barrier to keep water out, protect against stains, and extend the life of your concrete while leaving a ?wet look?, high gloss finish. Seals and protects concrete and masonry surfaces from the damaging effects of water, chemicals, and UV light. For use on driveways, patios, walkways, pool decks, basements and more. Provides a protective barrier to keep water out, protect against stains, and extend the life of your concrete while leaving a ?natural look?, low gloss finish. Portland-cement base coating. Holds back 22psi of hydrostatic pressure. Safe for drinking water cisterns. Seals, protects and beautifies vertical walls constructed of concrete, masonry, brick or stucco. Eliminates dampness and resists mildew, flaking or chalking while sealing all pores and voids. Helps reduce Radon Gas penetration through concrete block walls. Just add water to powder and mix; brushes on like paint. Mix with Damtite Bonding Additive in place of water for previously-painted or non-porous surfaces (poured concrete). Coverage (varies by porosity of surface and by first or second coat): 7lb to 93 sq ft (8.6 m2); 21lb to 280 sq ft (26 m2); 45lb to 600 sf (55.7 m2).
Homax 613 Wet Look Cure Seal Damtite 01451 Waterproofer Powder Drylok 22115 Natural Look Sealer
Protects from oil, rust, water and sprinkler stain penetration. Use on exposed aggregate, flagstone, concrete driveway, patio tile, walkway, and garage floor. Low odor and non-flammable. Leaves a clear natural wet look. Ready for traffic 8 to 24 hours. Apply with roller, brush, sponge, mop or airless sprayer. Covers 150 to 400 sq. ft. per gallon depending on porosity. Portland-cement base coating. Holds back 22psi of hydrostatic pressure. Safe for drinking water cisterns. Seals, protects and beautifies vertical walls constructed of concrete, masonry, brick or stucco. Eliminates dampness and resists mildew, flaking or chalking while sealing all pores and voids. Helps reduce Radon Gas penetration through concrete block walls. Just add water to powder and mix; brushes on like paint. Mix with Damtite Bonding Additive in place of water for previously-painted or non-porous surfaces (poured concrete). Coverage (varies by porosity of surface and by first or second coat): 7lb to 93 sq ft (8.6 m2); 21lb to 280 sq ft (26 m2); 45lb to 600 sf (55.7 m2). Protective coating for masonry surfaces. Prevents moisture damage. Penetrates deep to seal and protects masonry against acids, alkalis, household chemicals, gasoline, oil and salt. Covers up to 400 sq. ft. per gallon depending on surface porosity.
   
 
1 2