|
|
|
|
|
|
|
|
|
|
|
Open recessed trim ring, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815), and SHALLOW H27T (989.1672). H7RT (942.0381). Sleeved.
|
Open recessed trim ring, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (284.2474), H7RT (942.0381) and SHALLOW H27T (989.1672). Sleeved.
|
For use with 120 volt Incandescent lamps. Aluminum construction for greater heat dissipation. For installations where housing will be in direct contact with ceiling insulation. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket assures proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts. Slide-N-Slide connectors allow non-metallic sheathed cable to be installed without removing knockouts. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span. Can be field shortened for 12" joist. Installation: 7-1/2" height allows use in 2 x 8 joist construction. Housing accommodates ceilings up to 2" thick. Requires 6-1/2" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated.
|
|
|
|
|
|
|
|
|
|
|
|
|
Air-tite fixture sealed and gasketed to prevent airflow between attic and living areas. For installations where housing will be in direct contact with ceiling insulation. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket assures proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts. Slide-N-Slide connectors allow non-metallic sheathed cable to be installed without removing knockouts. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span. Can be field shortened for 12" joist. Installation: 7-1/2" height allows use in 2 x 8 joist construction. Housing accommodates ceilings up to 1" thick. Requires 6-1/2" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated.
|
Open recessed trim ring, 7-1/4" OD, 3-7/8" ID, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7ICT (552 4277), H71CAT (854 3951), H7RIC (025 9697). Sleeved.
|
Diameter of 6-1/2", white trim for use with 5" incandescent rounds. Non-insulated or insulated housings. 75 watt maximum. Bulb sold separately. For use with 5" housings: Halo model numbers (Orgill SKU numbers), H5T (424.1535), H5ICAT (651.3956) and H5RT (635.6182).
|
|
|
|
|
|
|
|
|
|
|
|
|
Can be installed below the ceiling. For installations in non-insulated ceilings or where insulation can be kept 3" from housing. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket allows the use of different lamp types and sizes as well as proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four Romex knockouts with integral strain relief. Installation: 7-1/2" height allows use in 2 x 8 joist construction. Four remodel clips secure housing and accommodate ceiling thickness from 3/8" to 5/8". Requires ceiling opening per template. Listings: UL Damp Locations. UL Feed Through. CSA Certified. IP Rated.
|
White trim ring with phenolic baffle, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815) and H7RT (942.0381).
|
For use with Halo H7 LED 600 Series and 900 Series LED modules. Rated for direct contact with air-permeable insulation in insulated ceilings, may also be used in non insulated ceilings. Air-tite fixture sealed and gasketed to prevent airflow between unconditioned areas and living areas. Rated for 15 watts maximum. 10-1/2" length x 7-1/2" width x 7-1/2" height with 1/2" plaster lip. Ceiling cutout: 6-1/2".
|
|
|
|
|
|
|
|
|
|
|
|
|
Wet location and AIR-TITE listed white trim with frosted Albalite Lens. 8" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (284.2474), H7RT (942.0381), and SHALLOW H27T (989.1672). Sleeved.
|
Self flanged socket supporting super trim AIR-TITE metal baffle with torsion spring construction, makes installation air-tite regardless of housing used. Prevents airflow between attic and living areas. 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815), H71CT (552.4277), H71CAT (854.3951), H7RT (942.0381) and H7RICT (025.9697). White trim, white baffle, white reflector. Sleeved.
|
Baffle, white trim. Diameter of 6-1/4" for use with 5" incandescent rounds. Non-insulated or insulated housings. 75 watt maximum. Bulb sold separately. For use with 5" housings: Halo model numbers (Orgill SKU numbers), H5T (424.1535), H5ICAT (651.3956) and H5RT (635.6182).
|
|
|
|
|
|
|
|
|
|
|
|
|
Wet location and AIR-TITE listed white trim with white eyeball 30 degree Tilt, 360 degree rotation, 8 "OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (540.1815), H71CT (552.4277), H71CAT (854.3951), H7RT (942.0381), H7RICT (025.9697) and SHALLOW H27T (989.1672). Sleeved.
|
Trim ring with phenolic baffle, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815), H71CT (552.4277), H71CAT (854.3951), H7RT (942.0381), H7RIC (025.9697) and SHALLOW H27T (989.1672). Sleeved.
|
Can be installed below ceiling. For installations where housing will be in direct contact with ceiling insulation. Integral thermal protector guards against improper lamping. Adjustable socket bracket assures proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four Romex knockouts with integral strain relief. Installation: 7-1/2" height allows use in 2 x 8 joist construction. Four remodel clips secure housing and accommodates ceiling thickness from 3/8" to 5/8". Requires ceiling opening per template. Listings: UL damp locations. UL feed through. UL Listed for direct contact with insulation. CSA certified. IP rated.
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with Halo H7 Collection 600 900 Series LED modules, designed for remodel into insulated ceilings and can be in direct contact with ceiling insulation. AIR-TITE housing design prevents airflow between attic and living areas. Single wall aluminum housing. Installs from below the ceiling in 1/2" or 5/8" ceiling material (may also be used in non insulated ceilings). Quick Connect wiring connectors included in junction box. Rated for 15 watts maximum. 13-1/4" length x 6-7/8" width x 7-1/2" height. Ceiling cutout: Match template supplied with housing - 6-1/4" typical.
|
For installations where housing will be in direct contact with ceiling insulation. Air-tite fixture sealed and gasketed to prevent airflow between attic and living areas. Integral thermal protector guards against misuse of insulation materials and improper lamping. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four Romex knockouts with integral strain relief. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span. Can be field shortened for 12" joist. Installation: 7-1/2" height allows use in 2 x 8 joist construction. Housing accommodates ceilings up to 1-3/8" thick. Requires 5-3/4" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated.
|
White trim, 5 1/16" diameter for use with 4" incandescent rounds. Non-insulated or insulated housings. For use with 4" housings: Halo model numbers (Orgill SKU numbers), H99T (571.7566), H99ICAT (159.7764) and H99RT (300.8448).
|
|
|
|
|
|
|
|
|
|
|
|
|
Air-tite fixture sealed and gasketed to prevent airflow between attic space and living areas. The inner housing can be removed from plaster frame to provide access to the junction box. For providing accent and task lighting in non-insulated ceiling or where insulation can be kept 3" from housing. Thermal protector deactivates fixture if overheating occurs due to improper lamping or misapplied insulation. Junction box has four 1/2" trade size conduit knockouts with true pry-out slots. UL/cUL Listed Damp Location, Wet Location, feed through covered ceiling with select trims and 1598 Luminaire. Certified under ASTM-E283 for air tight construction.
|
White trim ring with clear specular reflector cone, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815), H71CT (552.4277), H71CAT (854.3951), H7RT (942.0381), H7RICT (025.9697) and SHALLOW H27T (989.1672). Sleeved.
|
White trim, 5 1/16" diameter for use with 4" incandescent rounds. Non-insulated or insulated housings. For use with 4" housings: Halo model numbers (Orgill SKU numbers), H99T (571.7566), H99ICAT (159.7764) and H99RT (300.8448).
|
|
|
|
|
|
|
|
|
|
|
|
|
Trim ring with phenolic baffle, 7-1/4" OD, for use with 6" housings, white trim with white baffle, for slope ceiling. Halo model number SLOPE H645IC, Orgill SKU number:140.7022. Sleeved.
|
Comes with a dedicated LED connector for California Title 24 Compliance. For installation into Halo recessed LED housings. Includes an Edison base adapter to accommodate standard screwbase ICAT housings. Can be dimmed with many standard incandescent dimmers, however, an electronic low voltage version of a standard dimmer (with neutral connection) is recommended for many applications. 9.4" W. UL Listed and Classified.
|
Air-tite fixture sealed and gasketed to prevent airflow between attic space and living areas. Can be installed from below the ceiling. For providing accent and task lighting where insulation can be kept 3" from housing. Thermal protector deactivates fixture if overheating occurs due to improper lamping or misapplied insulation. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four pryouts with integral strain relief for non-metallic sheathed cable. Four remodel clips secure housing and accommodate ceiling thickness of 1/2" and 5/8". UL/cUL Listed 1598 Luminaire. UL/cUL Damp Location Listed. UL/cUL Listed for Wet Location, covered ceiling - with select trims. Certified Under ASTM-E283 for air tight construction.
|
|
|
|
|
|
|
|
|
|
|
|
|
Wet location and AIR-TITE listed white trim with frosted glass dome 7-3/4 "OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (540.1815), H71CT (552.4277), H71CAT (854.3951), H7RT (942.0381), H7RICT (025.9697) and SHALLOW H27T (989.1672). Sleeved.
|
For accent and task lighting where housing will be in direct contact with ceiling insulation. Air-tite fixture sealed and gasketed to prevent airflow between unconditioned areas and living areas. Integral thermal protector guards against misuse of insulation materials and improper lamping. Junction box with integral strain relief. Pass-N-Thru tool-less shortening of bar hangers. Housing can be removed from plaster frame for junction box access. UL Listed for direct contact with insulation. CSA Certified. IP Rated.
|
For use with 4" housings: Halo model numbers (Orgill SKU numbers), H99T (571.7566), H99ICAT (159.7764) and H99RT (300.8448). 5-1/16" diameter white trim for use with 4" incandescent rounds. Non-insulated or insulated housings. 30 degrees maximum tilt.
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for sloped ceiling installations for ceilings from 2/12 to 12/12 pitch. The socket mechanism allows the lamp to be aimed straight down regardless of ceiling pitch. Lamp socket and trim can be adjusted 20 degrees laterally for compound slope ceilings or to compensate for off axis aiming. Air-tite fixture sealed and gasketed to prevent airflow between attic and living areas. For installations where housing will be in direct contact with ceiling insulation. Integral thermal protector guards against misuse of insulation materials and improper lamping. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four Romex knockouts with integral strain relief. Plaster frame includes locking screw for hanger bars and cut outs for crimping hanger bars into position. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span. Can be field shortened for 12" joist. Installation: 7-3/8" height allows use in 2 x 8 joist construction. Housing accommodates ceilings up to 1-1/4" thick. Requires 6-1/2" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated.
|
For installations in non-insulated ceilings or where insulation can be kept 3" from housing. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket allows the use of different lamp types and sizes as well as proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four Romex knockouts with integral strain relief. Plaster frame includes locking screw for hanger bars and cut outs for crimping hanger bars into position. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span and can be field shortened for 12" joist. Installation: 5-1/2" height allows use in 2 x 6 joist construction. Housing accommodates ceilings up to 2" thick. Requires 6-1/2" ceiling opening. Ring fixture not included. Listings: UL Damp Locations. UL Feed Through. CSA Certified. IP Rated.
|
Designed for use in shallow ceilings where 2" x 6" joist construction is used, prevents airflow between living spaces and unconditioned attic areas. Meets the requirements of: California Title 24 for use in insulated ceilings. UL listing for Damp Location, UL listing for feed through wiring, UL listing for direct contact with insulation and combustible material and CSA certification.
|
|