Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL FITTINGS > GROUNDING RODS/CLAMPS
Sort By:
1 2
Gardner Bender GGC-1508 Ground Clip Eritech ZWP1J Grounding Pipe Clamp Halex 16010B Ground Clamp
Convenient grounding accessories include products suitable for most job requirements. Bolted water pipe clamps made of zinc die-cast. Wire range 8 solid to 2 stranded. UL listed. Connects grounding wire to the grounding rod. Indoor or outdoor applications. Use to secure the grounding wire to a 1/2 in through 1 in pipe. UL listed. Wire size fits #10 to 2 AWG.
Halex 93592 Ground Clamp Gardner Bender GGS-1512R Ground Screw Gardner Bender GGP-1502 Grounding Pigtail
Connects grounding wire to the grounding rod. Green round washer head screw for switch and outlet boxes. GB offers a convenient grounding accessories line of products suitable for most job requirements. This grounding pig tail is made from #12 AWG stranded wire. One end is terminated with a bare fork terminal. The other end is a captured screw.
Gardner Bender 14-GRC Ground Clamp Halex 93591 Ground Clamp Eritech CP58 Acorn Standard Duty Ground Clamp
Connects grounding wire to the grounding rod. Connects grounding wire to the grounding rod. Connects grounding wire to the grounding rod. UL and CSA listed for 1/2 in and 5/8 in ground rods and number 4 rebar and accept a conductor range from number 10 solid to number 2 stranded.
Halex 36010 Ground Clamp Cutler-Hammer GBK10P Ground Bar Kits Halex 36019 Ground Clamp
Indoor or outdoor applications. Use to secure the grounding wire to a 1/2 in through 1 in pipe. UL listed. Wire size fits #10 to 2 AWG. Cutler Hammer Ground Bar Kit, 10 Terminals, 4.26 in Length, Used with BR and CH Series Loadcenters Indoor or outdoor applications. Use to secure the grounding wire to a 1/2 in through 1 in pipe. UL listed. Wire size fits #10 to 2 AWG.
Cutler-Hammer GBK14P Ground Bar Kits Eritech CWP1J Grounding Pipe Clamp Eritech CWP1JU Grounding Pipe Clamp
Cutler Hammer Ground Bar Kit, 14 Terminals, UL Listed Bolted water pipe grounding clamp. UL listed. Made of corrosion-resistant copper alloy. Bolted water pipe clamps made from high-strength corrosion-resistant copper alloy. Connects grounding wire to the grounding rod. Range 10 solid to 2 stranded. UL listed.
GRNDG PGTAIL SLD GRN 12AWG 8IN Square D PK7GTACP Ground Bar Kits Cutler Hammer GBK21P Ground Bar Kit
Southwire Grounding Pigtail with Screws, Wire Size: 14 to 12 AWG, Green, Dimensions: 8 in L, Includes: 10/32 Grounding Screw with Combination Head Schneider Ground Bar Kit, 7 Terminals, Aluminum/Copper, 14 - 4 AWG, 12 - 4 AWG, 14 - 12 AWG, 12 - 10 AWG Conductor, 30 - 400 A, Aluminum, UL Listed, Used in Load Centers, CSED Devices and NQOD and NF Panel Boards Cutler Hammer Ground Bar Kit, 21 Terminals, 8.14 in Length, Aluminum/Copper, Used on CH Loadcenter
Siemens Energy ECGB10 Ground Bar Kits Halex 63299 Ground Screw Eritech 811260UPC Grounding Rod
Siemens Ground Bar Kit, 10 Terminals, Aluminum/Copper, 14 - 4 AWG Conductor, 60/75 deg C, For Equipment Grounding Provision Indoor or outdoor applications. Use to ground a wiring device to a steel outlet box. Green color. Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel.
Schneider PK9GTACP Ground Bar Kit Eritech EK17 Direct Burial Perpendicular Ground Clamp Eritech EK16 Direct Burial Ground Clamp
Schneider Ground Bar Kit, 9 Terminals, Aluminum/Copper, 14 - 4 AWG, 12 - 4 AWG, 14 - 12 AWG, 12 - 10 AWG Conductor, 30 - 400 A, Aluminum, UL Listed, Used in Load Centers, CSED Devices and NQOD and NF Panel Boards Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and concrete. Pipe range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Rebar range from #4 (10 mm) to #8 (25 mm). Ground rod range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Conductor range from #10 (5.5 sq-mm) to #2 (25 sq-mm). UL listed. Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and concrete. Pipe range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Rebar range from #4 (10 mm) to #8 (25 mm). Ground rod range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Conductor range from #10 (5.5 sq-mm) to #2 (25 sq-mm). UL listed.
Halex 36020 Ground Clamp Square D PK12GTACP Ground Bar Kits Eritech 615840UPC Grounding Rod
Wire size fits #10 to 2 AWG. Use to secure the grounding wire to a 1-1/4 to 2 in or 2-1/2 to 4 in pipe. Bronze. UL listed. Schneider Ground Bar Kit, 12 Terminals, Aluminum/Copper, 14 - 4 AWG, 12 - 4 AWG, 14 - 12 AWG, 12 - 10 AWG Conductor, 30 - 400 A, Aluminum, ANSI Specified, UL Listed, Used in Load Centers, CSED Devices and NQOD and NF Panel Boards Copper bonded, resists corrosion better than galvanized rods, allowing for a 30 year service life in most soils. Uniform plating thickness, average tensile strength of 80000 psi and straightness tolerance of 0.010 in per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA and ANSI/NEMA GR-1.
Square D PK15GTACP Ground Bar Kits Schneider PK18GTACP Ground Bar Kit Square D PK23GTACP Ground Bar Kits
Schneider Ground Bar Kit, 15 Terminals, Aluminum/Copper, 14 - 4 AWG, 12 - 4 AWG, 14 - 12 AWG, 12 - 10 AWG Conductor, 30 - 400 A, Aluminum, ANSI Specified, UL Listed, Used in Load Centers, CSED Devices and NQOD and NF Panel Boards Schneider Ground Bar Kit, 18 Terminals, Aluminum/Copper, 14 - 4 AWG, 12 - 4 AWG, 14 - 12 AWG, 12 - 10 AWG Conductor, 30 - 400 A, Aluminum, ANSI Specified, UL Listed, Used in Load Centers, CSED Devices and NQOD and NF Panel Boards Schneider Ground Bar Kit, 23 Terminals, Aluminum/Copper, 14 - 4 AWG, 12 - 4 AWG, 14 - 12 AWG, 12 - 10 AWG Conductor, 30 - 400 A, Aluminum, ANSI Specified, UL Listed, Used in Load Centers, CSED Devices and NQOD and NF Panel Boards
   
 
1 2