|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fitting for 5/8 in OD tube (brass). New style 15/16-16 thread. AGA design certified.
|
For 1/4 in ID (3/8 in OD) corrugated tube. For gas clothes dryer connections. Tapped 1/8 in female pipe thread. Dimension of 5-1/2 in L x 3.8 in W x 0.6 in D.
|
Fitting for 5/8 in OD tube (brass). New style 15/16-16 thread. AGA design certified.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For 1/4 in ID (3/8 in OD) corrugated tube. Recommended for gas clothes dryer connections. Use with PlumbShop SL or RSL Series connectors.
|
For 1/4 in ID (3/8 in OD) corrugated tube. Recommended for gas clothes dryer connections. Use with SL or RSL Series connectors. Tapped 3/8 in female pipe thread.
|
For corrugated tube. Recommended for gas range connections.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BrassCraft Flare Adaptor, Nominal Size: 3/8 in, Flare x MIP Connection, Brass, Chromate-Coated, Yellow
|
Fitting for 5/8 in OD tube (brass). New style 15/16-16 thread. AGA design certified.
|
Fitting for 5/8 in OD tube (brass). New style 15/16-16 thread. A.G.A. design certified.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For 1/2 in ID (5/8 in OD) corrugated. Recommended for gas range connectors. Use with PlumbShop SC or RSC Series connectors. 1/2 in MIP end tapped 3/8 in FIP thread, 3/4 in MIP tapped 1/2 in FIP.
|
For corrugated tube. Recommended for gas range connections.
|
For 3/8 in ID (1/2 in OD) corrugated tube. Recommended for forced air heaters, gas ranges, furnaces and water heater connections. Use with PlumbShop SD or RSD Series connectors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For 1/2 in ID (5/8 in OD) corrugated. Recommended for gas range connectors. Use with PlumbShop SC or RSC Series connectors. 1/2 in MIP end tapped 3/8 in FIP thread, 3/4 in MIP tapped 1/2 in FIP.
|
For 3/8 in ID (1/2 in OD) corrugated tube. Recommended for fixed air heater, gas range, furnace and water heater connections. Used with PlumbShop SD or RSD Series connectors. Tapped 3/8 in FIP thread.
|
Two-pieces construction, nut and body. Use with copper, brass, aluminum or steel tubing. -65 to 250 deg F temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration and vacuum. UPC individually bagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
9/16 in to 24 fine thread flare end for space heaters. Bagged with flag tag.
|
9/16 in to 24 fine thread flare end for space heaters. Bagged with flag tag.
|
Two-pieces construction, nut and body. Use with copper, brass, aluminum or steel tubing. -65 to 250 deg F temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration and vacuum. UPC individually bagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
15/16-16 thread for brass range connectors. UPC individually bagged.
|
Two-pieces construction, nut and body. Use with copper, brass, aluminum or steel tubing. -65 to 250 deg F temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration and vacuum. UPC individually bagged.
|
15/16-16 thread for brass range connectors. UPC individually bagged.
|
|
|
