Home > HEATING & COOLING > HEAT & AIR CONDITIONING > DUCT WORK
Choose a sub category:
DUCT PIPE DUCT ACCESSORIES REGISTER BOOTS / STACKS
Sort By:
1 2
Imperial GV0752 Round Damper With Duct Key Imperial GV0957-B Side Take-Off Imperial GV0704-C Standard Straight Back Wall Register Boot
Use to adjust and balance airflow in individual runs of round pipe. Used for transition from air plenums or rectangular duct to round pipe or insulated duct. 30 ga. Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 ga.
Imperial GV0705-C Standard Straight Back Wall Register Boot Imperial GV0667-C Center Wall Register Boot DUCT REDUCER 4IN - 3IN 30GA
Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 ga. Used for right-angle center-end transition from round pipe or insulated flexible duct to a register or grille. Used to reduce diameter of galvanized round perimeter pipe. Crimped on small end.
DUCT ANGLE BOOT 3-1/4X10X4IN VNTLR 4in WHT PLSTC Lambro DUCT WYE GALV 4 X 4 X 4IN 30GA
Used for right-angle transition from round pipe or insulated flexible duct to a register or grille. Under eave vent for bathroom fan and dryer venting. Used primarily for heating and air conditioning applications for transition from one round pipe two round pipes.
Imperial GV2450 Straight Back Wall Register Boot BOOT REGISTER UNIV 3.25X10X6IN Imperial GV0699-C Standard Straight Back Wall Register Boot
Imperial Wall Register Boot, Galvanized, 3 in L, 10 in W Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 ga. Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 ga.
DUCT REDUCER 6IN - 4IN 30GA DUCT REDUCER 7IN - 6IN 28GA DUCT WYE GALV 5 X 5 X 5IN 30GA
Used to reduce diameter of galvanized round perimeter pipe. Crimped on small end. Used to reduce diameter of galvanized round perimeter pipe. Crimped on small end. Used primarily for heating and air conditioning applications for transition from one round pipe two round pipes.
DUCT WYE GALV 6 X 6 X 6IN 30GA Frost King SP55/6 Foil Fiberglass Wrap 15 ft L x 2 in T Imperial GV2451 Wall Stack Boot
Used primarily for heating and air conditioning applications for transition from one round pipe two round pipes. Combines the properties of two popular insulating materials in one handy roll. It can be used on both heating and air-conditioning ducts, as well as on car and truck hoods and trunks. Imperial Wall Stack Boot, Galvanized, 3-1/4 in L, 10 in W
DUCT REDUCER 6IN - 5IN 30GA Lambro 304 Flexible Duct Pipe Imperial GV0626-C Wall Register Boot
Used to reduce diameter of galvanized round perimeter pipe. Crimped on small end. Semi-rigid aluminum duct is ideal for applications where building codes require use of all aluminum duct. The duct is totally non-combustible with a maximum operating temperature of 400 deg F. Used for right-angle transition from round pipe or insulated flexible duct to a register or grille.
Imperial GVO621-C Wall Register Boot Imperial GV0627-C Wall Register Boot DUCT ANGLE BOOT 3-1/4X10X6IN
Used for right-angle transition from round pipe or insulated flexible duct to a register or grille. Used for right-angle transition from round pipe or insulated flexible duct to a register or grille. Used for right-angle transition from round pipe or insulated flexible duct to a register or grille.
Lambro 306 Flexible Duct Pipe Imperial GV0945-C Adjustable Round Duct Take Off Imperial GV0959-C Side Take-Off
Semi-rigid aluminum duct is ideal for applications where building codes require use of all aluminum duct. The duct is totally non-combustible with a maximum operating temperature of 400 deg F. Used for transition from rectangular duct to round pipe or insulated flexible duct. Adjustable from 0 to 90 deg (.30 ga). Used for transition from air plenums or rectangular duct to round pipe or insulated duct. 30 ga.
Lambro 308 Flexible Duct Pipe Imperial GV0060-C Short Way Wall Stack Elbow Imperial GV0092-C Wall Stack Elbow
Semi-rigid aluminum duct is ideal for applications where building codes require use of all aluminum duct. The duct is totally non-combustible with a maximum operating temperature of 400 deg F. Used to change the horizontal direction of two sections of rectangular stack duct. 30 ga. Used to change the vertical direction of two sections of rectangular stack duct. 30 ga.
   
 
1 2