|
|
|
|
|
|
|
|
|
|
|
|
|
|
Recommended applications: caulk, sealants, paint, soft adhesives and foam insulation. Users are recommended to hold the blade at a 30 to 40 degree angle to the work surface. Popular projects: removing caulk/sealant in bathrooms, scraping flaky paint, removing old adhesives when restoring vehicles and clearing excess foam.
|
For removing old vinyl, wood or other floor coverings, paint and coatings, residues and separating laminated layers and cuts carpets. Universal fit system allow accessory to fit all major brand oscillating tools.
|
Aggressive flush cuts and plunge cuts in wood, plastic, drywall and other soft materials up to 1-9/16" deep. Beveled tooth design for maximum blade durability and versatility. Special design creates cleaner, more accurate flush cuts. For use with all brands of Multi-purpose oscillating tools.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rigid scraper blade for removal of vinyl flooring, bonded carpeting, old coats of varnish/paint and adhesives. Flexible scraper blade for removal of caulk, coats of peeling paint and soft adhesives. For use with all brands of multi-purpose oscillating tools.
|
For plunge cuts and flush cuts in wood, plastic, drywall and other soft materials up to 1-9/16" deep. Use with all brands of multi-purpose oscillating tools.
|
For removing deep penetrating adhesive, caulking, silicone and other soft bonding materials up to 3" deep. For use with all brands of Multi-Purpose oscillating tools.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Large area removal of harder materials such as vinyl flooring and bonded carpeting or scraping off coats of paint, varnish or adhesives. Blade is 5.5"x3.9". Use with 122.5929.
|
Blade is used for making precise cuts in wood, plaster, drywall material in such applications as cutting openings in flooring for venting, repairing damaged flooring and cutting openings for electrical boxes; can also be used for window restoration to remove glazing. Use with 122.5929.
|
For plunge cutting up to 1-5/8" depth on wood, plastic, fiberglass, nails, non-ferrous metals, thin sheet metal and hardened fillers. Universal fit system allow accessory to fit all major brand oscillating tools.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For general purpose plunge cutting up to 1-5/8" depth in non-metal materials like wood, plastic and drywall. Universal fit system allow accessory to fit all major brand oscillating tools. Blade width - 1-3/8".
|
Precision-ground, beveled tooth design allows for aggressive plunge cutting up to 1-5/8" depth on wood and soft plastics.
|
Rigid oscillating blade for scraping. Universal fit compatible with Fein, Bosch, Dremel, Rockwell, Porter-Cable and other brands.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For sawing. Bi-Metal for longer life cutting in wood with nail applications. 1-5/8" plunge depth. 18 teeth per inch.
|
Double-row Japanese toothing for all wood materials, plasterboard and soft plastics. For fast work progress and maximum precision. Extra wide shape for maximum cutting performance and long straight cuts.
|
High-carbon steel cutting edge for general purpose wood cutting applications. Curved Tec blade design for greater control and smooth, precise plunge cuts. Color coded interface and laser etched blade to quickly identify the right blade. Starlock interface for professional performance, also works with OIS compatible tools including Bosch, Fein, Milwaukee, Makita, Rigid and others. Precision Swiss made blade for accuracy and long life.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For removing elastic sealants, paint adhesive residues, wallpaper, worn gaskets, etc. Cuts carpet, leather, linoleum and similar materials. Universal fit system allow accessory to fit all major brand oscillating tools.
|
Bi-metal 1-3/8" blade for plunge cuts and flush cuts in nails, nail-embedded wood, copper, aluminum, other non-ferrous metals, mild steel, wood, plastic, drywall and other soft materials up to 1-9/16" deep. For use with all brands of multi-purpose oscillating tools.
|
For sawing. General purpose plunge cuts up to 1-5/8" depth in non-metal materials. High-Carbon steel. 12 teeth per inch.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bi-metal with wavy universal toothing. Broad application spectrum for sheet metal up to 1/16", aluminum profile, copper pipes, wood, plasterboard and plastics. Wide, waisted shape for optimal cutting speed and good swarf removal.
|
Flexible scrapers are used for hard to reach areas and removal of soft materials such as caulk. Make sure the blade is flexed during the scraping process. A 30 to 45 degree pitch is recommended. Use with 122.5929.
|
For plunge cutting up to 1-5/8" depth on wood, plastic, fiberglass, nails, non-ferrous metals, thin sheet metal and hardened fillers. Universal fit system allow accessory to fit all major brand oscillating tools.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
15 TPI coarse tooth blade for fast plunge cuts and flush cuts in wood, plastic, drywall and other soft materials up to 2-1/4" deep. For use with all brands of Multi-Purpose Oscillating tools.
|
For continuous cutting in wood, drywall, plastic, copper, aluminum, other non-ferrous metals, and other soft materials. Use with all brands of multi-purpose oscillating tools.
|
Double-row Japanese toothing for all wood materials, plasterboard and soft plastics. For fast work progress and maximum precision. Extra wide shape for maximum cutting performance and long straight cuts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Precision-ground, beveled tooth design allows for aggressive plunge cutting up to 1-5/8" depth on wood and soft plastics.
|
For sawing. General purpose plunge cuts up to 1-5/8" depth in non-metal materials. 12 teeth per inch. High-Carbon steel.
|
For sawing. Japanese teeth for precision cutting in hardwoods up to 1-5/8" depth. High-Carbon steel. 14 teeth per inch.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bi-metal with wavy universal toothing. Broad application spectrum for sheet metal up to 1/16", aluminum profile, copper pipes, wood, plasterboard and plastics. Wide, waisted shape for optimal cutting speed and good swarf removal.
|
Bi-metal with teeth set for all woods, plasterboard and plastic materials. Very clean cut and excellent work progress. Medium width, waisted shape for optimal cutting speed and good swarf removal. 1-3/8" Width x 2" Length. Extremely robust, unaffected by nails in wood (up to approximately 3/16" diam.), masonry, etc.
|
Recommended applications: caulk, sealants, paint, soft adhesives and foam insulation. Users are recommended to hold the blade at a 30 to 40 degree angle to the work surface. Popular projects: removing caulk/sealant in bathrooms, scraping flaky paint, removing old adhesives when restoring vehicles and clearing excess foam.
|
|
|
